diff --git a/alacritty/.config/alacritty/alacritty.toml b/alacritty/.config/alacritty/alacritty.toml
new file mode 100644
index 0000000..2cda62e
--- /dev/null
+++ b/alacritty/.config/alacritty/alacritty.toml
@@ -0,0 +1,15 @@
+[font.bold]
+family = "FiraCode Nerd Font Mono"
+style = "Bold"
+
+[font.bold_italic]
+family = "FiraCode Nerd Font Mono"
+style = "Bold Italic"
+
+[font.italic]
+family = "FiraCode Nerd Font Mono"
+style = "Italic"
+
+[font.normal]
+family = "FiraCode Nerd Font Mono"
+style = "Regular"
diff --git a/i3/.config/i3/config b/i3/.config/i3/config
new file mode 100644
index 0000000..d67cc91
--- /dev/null
+++ b/i3/.config/i3/config
@@ -0,0 +1,201 @@
+# This file has been auto-generated by i3-config-wizard(1).
+# It will not be overwritten, so edit it as you like.
+#
+# Should you change your keyboard layout some time, delete
+# this file and re-run i3-config-wizard(1).
+#
+
+# i3 config file (v4)
+#
+# Please see https://i3wm.org/docs/userguide.html for a complete reference!
+
+set $mod Mod4
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar {} block below.
+#font pango:monospace 8
+
+# This font is widely installed, provides lots of unicode glyphs, right-to-left
+# text rendering and scalability on retina/hidpi displays (thanks to pango).
+font pango:FiraCode Nerd Font Mono 10
+
+exec --no-startup-id ~/.config/i3/setup_monitors.sh
+exec_always --no-startup-id $HOME/.config/polybar/launch.sh
+
+# Start XDG autostart .desktop files using dex. See also
+# https://wiki.archlinux.org/index.php/XDG_Autostart
+exec --no-startup-id dex --autostart --environment i3
+
+# The combination of xss-lock, nm-applet and pactl is a popular choice, so
+# they are included here as an example. Modify as you see fit.
+
+# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
+# screen before suspend. Use loginctl lock-session to lock your screen.
+exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork
+
+# NetworkManager is the most popular way to manage wireless networks on Linux,
+# and nm-applet is a desktop environment-independent system tray GUI for it.
+exec --no-startup-id nm-applet
+
+# Use pactl to adjust volume in PulseAudio.
+set $refresh_i3status killall -SIGUSR1 i3status
+bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +10% && $refresh_i3status
+bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -10% && $refresh_i3status
+bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle && $refresh_i3status
+bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle && $refresh_i3status
+
+# Use Mouse+$mod to drag floating windows to their wanted position
+floating_modifier $mod
+
+# move tiling windows via drag & drop by left-clicking into the title bar,
+# or left-clicking anywhere into the window while holding the floating modifier.
+tiling_drag modifier titlebar
+
+# start a terminal
+bindsym $mod+Return exec alacritty
+
+# kill focused window
+bindsym $mod+Shift+a kilnux ril
+
+# start dmenu (a program launcher)
+bindsym $mod+d exec --no-startup-id dmenu_run
+# A more modern dmenu replacement is rofi:
+# bindcode $mod+40 exec "rofi -modi drun,run -show drun"
+# There also is i3-dmenu-desktop which only displays applications shipping a
+# .desktop file. It is a wrapper around dmenu, so you need that installed.
+# bindcode $mod+40 exec --no-startup-id i3-dmenu-desktop
+
+# change focus
+bindsym $mod+j focus left
+bindsym $mod+k focus down
+bindsym $mod+l focus up
+bindsym $mod+m focus right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Left focus left
+bindsym $mod+Down focus down
+bindsym $mod+Up focus up
+bindsym $mod+Right focus right
+
+# move focused window
+bindsym $mod+Shift+j move left
+bindsym $mod+Shift+k move down
+bindsym $mod+Shift+l move up
+bindsym $mod+Shift+m move right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Shift+Left move left
+bindsym $mod+Shift+Down move down
+bindsym $mod+Shift+Up move up
+bindsym $mod+Shift+Right move right
+
+# split in horizontal orientation
+bindsym $mod+h split h
+
+# split in vertical orientation
+bindsym $mod+v split v
+
+# enter fullscreen mode for the focused container
+bindsym $mod+f fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
+bindsym $mod+s layout stacking
+bindsym $mod+z layout tabbed
+bindsym $mod+e layout toggle split
+
+# toggle tiling / floating
+bindsym $mod+Shift+space floating toggle
+
+# change focus between tiling / floating windows
+bindsym $mod+space focus mode_toggle
+
+# focus the parent container
+bindsym $mod+q focus parent
+
+# focus the child container
+#bindsym $mod+d focus child
+
+# Define names for default workspaces for which we configure key bindings later on.
+# We use variables to avoid repeating the names in multiple places.
+set $ws1 "1"
+set $ws2 "2"
+set $ws3 "3"
+set $ws4 "4"
+set $ws5 "5"
+set $ws6 "6"
+set $ws7 "7"
+set $ws8 "8"
+set $ws9 "9"
+set $ws10 "10"
+
+workspace 1 output DP-1
+workspace 2 output DP-1-0
+workspace 3 output DP-1-2
+workspace 4 output DP-1
+workspace 5 output DP-1-0
+workspace 6 output DP-1-2
+workspace 7 output DP-1
+workspace 8 output DP-1-0
+workspace 9 output DP-1-2
+workspace 10 output DP-1
+
+# switch to workspace
+bindsym $mod+ampersand workspace number $ws1
+bindsym $mod+eacute workspace number $ws2
+bindsym $mod+quotedbl workspace number $ws3
+bindsym $mod+apostrophe workspace number $ws4
+bindsym $mod+parenleft workspace number $ws5
+bindsym $mod+minus workspace number $ws6
+bindsym $mod+egrave workspace number $ws7
+bindsym $mod+underscore workspace number $ws8
+bindsym $mod+ccedilla workspace number $ws9
+bindsym $mod+agrave workspace number $ws10
+
+# move focused container to workspace
+bindsym $mod+Shift+ampersand move container to workspace number $ws1
+bindsym $mod+Shift+eacute move container to workspace number $ws2
+bindsym $mod+Shift+quotedbl move container to workspace number $ws3
+bindsym $mod+Shift+apostrophe move container to workspace number $ws4
+bindsym $mod+Shift+5 move container to workspace number $ws5
+bindsym $mod+Shift+minus move container to workspace number $ws6
+bindsym $mod+Shift+egrave move container to workspace number $ws7
+bindsym $mod+Shift+underscore move container to workspace number $ws8
+bindsym $mod+Shift+ccedilla move container to workspace number $ws9
+bindsym $mod+Shift+agrave move container to workspace number $ws10
+
+# reload the configuration file
+bindsym $mod+Shift+c reload
+# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
+bindsym $mod+Shift+r restart
+# exit i3 (logs you out of your X session)
+bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"
+
+# resize window (you can also use the mouse for that)
+mode "resize" {
+        # These bindings trigger as soon as you enter the resize mode
+
+        # Pressing left will shrink the window’s width.
+        # Pressing right will grow the window’s width.
+        # Pressing up will shrink the window’s height.
+        # Pressing down will grow the window’s height.
+        bindsym j resize shrink width 10 px or 10 ppt
+        bindsym k resize grow height 10 px or 10 ppt
+        bindsym l resize shrink height 10 px or 10 ppt
+        bindsym m resize grow width 10 px or 10 ppt
+
+        # same bindings, but for the arrow keys
+        bindsym Left resize shrink width 10 px or 10 ppt
+        bindsym Down resize grow height 10 px or 10 ppt
+        bindsym Up resize shrink height 10 px or 10 ppt
+        bindsym Right resize grow width 10 px or 10 ppt
+
+        # back to normal: Enter or Escape or $mod+r
+        bindsym Return mode "default"
+        bindsym Escape mode "default"
+        bindsym $mod+r mode "default"
+}
+
+bindsym $mod+r mode "resize"
+
+# Start i3bar to display a workspace bar (plus the system information i3status
+# finds out, if available)
diff --git a/i3/.config/i3/setup_monitors.sh b/i3/.config/i3/setup_monitors.sh
new file mode 100755
index 0000000..f8a644e
--- /dev/null
+++ b/i3/.config/i3/setup_monitors.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+xrandr --output DP-1 --primary
+xrandr --output DP-1-0 --left-of DP-1 --auto
+xrandr --output DP-1-2 --right-of DP-1 --auto
diff --git a/lazygit/.config/lazygit/config.yml b/lazygit/.config/lazygit/config.yml
new file mode 100644
index 0000000..bd768b7
--- /dev/null
+++ b/lazygit/.config/lazygit/config.yml
@@ -0,0 +1,23 @@
+# yaml-language-server: $schema=https://json.schemastore.org/lazygit.json
+
+gui:
+  theme:
+    activeBorderColor:
+      - '#89b4fa'
+      - bold
+    inactiveBorderColor:
+      - '#a6adc8'
+    optionsTextColor:
+      - '#89b4fa'
+    selectedLineBgColor:
+      - '#313244'
+    cherryPickedCommitBgColor:
+      - '#45475a'
+    cherryPickedCommitFgColor:
+      - '#89b4fa'
+    unstagedChangesColor:
+      - '#f38ba8'
+    defaultFgColor:
+      - '#cdd6f4'
+    searchingActiveBorderColor:
+      - '#f9e2af'
diff --git a/nvim/.config/nvim/init.lua b/nvim/.config/nvim/init.lua
new file mode 100755
index 0000000..ea49ffa
--- /dev/null
+++ b/nvim/.config/nvim/init.lua
@@ -0,0 +1 @@
+require("user")
diff --git a/nvim/.config/nvim/lazy-lock.json b/nvim/.config/nvim/lazy-lock.json
new file mode 100755
index 0000000..785636b
--- /dev/null
+++ b/nvim/.config/nvim/lazy-lock.json
@@ -0,0 +1,30 @@
+{
+  "Comment.nvim": { "branch": "master", "commit": "0236521ea582747b58869cb72f70ccfa967d2e89" },
+  "LuaSnip": { "branch": "master", "commit": "de1a287c9cb525ae52bc846e8f6207e5ef1da5ac" },
+  "catppuccin": { "branch": "main", "commit": "d97387aea8264f484bb5d5e74f2182a06c83e0d8" },
+  "cmp-nvim-lsp": { "branch": "main", "commit": "39e2eda76828d88b773cc27a3f61d2ad782c922d" },
+  "cmp_luasnip": { "branch": "master", "commit": "05a9ab28b53f71d1aece421ef32fee2cb857a843" },
+  "copilot.vim": { "branch": "release", "commit": "25feddf8e3aa79f0573c8f43ddb13c44c530cfa5" },
+  "fidget.nvim": { "branch": "main", "commit": "ef99df04a1c53a453602421bc0f756997edc8289" },
+  "lazy.nvim": { "branch": "main", "commit": "8f19915175395680808de529e4220da8dafc0759" },
+  "lualine.nvim": { "branch": "master", "commit": "0a5a66803c7407767b799067986b4dc3036e1983" },
+  "mason-lspconfig.nvim": { "branch": "main", "commit": "a4caa0d083aab56f6cd5acf2d42331b74614a585" },
+  "mason-tool-installer.nvim": { "branch": "main", "commit": "c1fbdcb0d8d1295314f1612c4a247253e70299d9" },
+  "mason.nvim": { "branch": "main", "commit": "49ff59aded1047a773670651cfa40e76e63c6377" },
+  "neo-tree.nvim": { "branch": "v3.x", "commit": "7aad1bf3f6b849cbf108e02c55ad4d701cb4d33a" },
+  "new-file-template.nvim": { "branch": "master", "commit": "e4d0654225326816a80545c97f31f57407658e34" },
+  "none-ls.nvim": { "branch": "main", "commit": "37671797d6e5f9bd0ee3ab965ab2e6de251e1930" },
+  "nui.nvim": { "branch": "main", "commit": "b1b3dcd6ed8f355c78bad3d395ff645be5f8b6ae" },
+  "nvim-cmp": { "branch": "main", "commit": "5260e5e8ecadaf13e6b82cf867a909f54e15fd07" },
+  "nvim-lspconfig": { "branch": "master", "commit": "eadcee1573ca9d0e0cd36a49f620186a8dfdc607" },
+  "nvim-treesitter": { "branch": "master", "commit": "30de5e7e9486fb1b1b8c2a1e71052b13f94f1cb0" },
+  "nvim-web-devicons": { "branch": "master", "commit": "e37bb1feee9e7320c76050a55443fa843b4b6f83" },
+  "plenary.nvim": { "branch": "master", "commit": "a3e3bc82a3f95c5ed0d7201546d5d2c19b20d683" },
+  "telescope-ui-select.nvim": { "branch": "master", "commit": "6e51d7da30bd139a6950adf2a47fda6df9fa06d2" },
+  "telescope.nvim": { "branch": "master", "commit": "d90956833d7c27e73c621a61f20b29fdb7122709" },
+  "trouble.nvim": { "branch": "main", "commit": "a8264a65a0b894832ea642844f5b7c30112c458f" },
+  "vim-dadbod": { "branch": "master", "commit": "fb30422b7bee7e2fa4205a4d226f01477f4fc593" },
+  "vim-dadbod-completion": { "branch": "master", "commit": "5d5ad196fcde223509d7dabbade0148f7884c5e3" },
+  "vim-dadbod-ui": { "branch": "master", "commit": "5aa854ee6017e9a3463d3dc8eee5aac93739f021" },
+  "which-key.nvim": { "branch": "main", "commit": "4433e5ec9a507e5097571ed55c02ea9658fb268a" }
+}
\ No newline at end of file
diff --git a/nvim/.config/nvim/lua/plugins/catppuccin.lua b/nvim/.config/nvim/lua/plugins/catppuccin.lua
new file mode 100644
index 0000000..b54e905
--- /dev/null
+++ b/nvim/.config/nvim/lua/plugins/catppuccin.lua
@@ -0,0 +1,23 @@
+return {
+	{
+		"catppuccin/nvim",
+		name = "catppuccin",
+		priority = 1000,
+		config = function()
+			require("catppuccin").setup({
+				flavour = "mocha",
+				integrations = {
+					cmp = true,
+					gitsigns = true,
+					nvimtree = true,
+					treesitter = true,
+					telescope = {
+						enabled = true,
+					},
+					mason = true,
+				},
+			})
+			vim.cmd.colorscheme("catppuccin")
+		end,
+	},
+}
diff --git a/nvim/.config/nvim/lua/plugins/cmp.lua b/nvim/.config/nvim/lua/plugins/cmp.lua
new file mode 100755
index 0000000..9603487
--- /dev/null
+++ b/nvim/.config/nvim/lua/plugins/cmp.lua
@@ -0,0 +1,53 @@
+return {
+  {
+    "hrsh7th/nvim-cmp",
+    dependencies = {
+      "hrsh7th/cmp-nvim-lsp",
+      "L3MON4D3/LuaSnip",
+      "saadparwaiz1/cmp_luasnip",
+    },
+    config = function()
+      local cmp = require("cmp")
+      local luasnip = require("luasnip")
+
+      cmp.setup({
+        snippet = {
+          expand = function(args)
+            luasnip.lsp_expand(args.body)
+          end,
+        },
+        window = {
+          completion = cmp.config.window.bordered(),
+          documentation = cmp.config.window.bordered(),
+        },
+        sources = cmp.config.sources({
+          { name = "nvim_lsp" },
+          { name = "luasnip" },
+        }),
+        mapping = {
+          ["<C-d>"] = cmp.mapping.scroll_docs(-4),
+          ["<C-f>"] = cmp.mapping.scroll_docs(4),
+          ["<C-Space>"] = cmp.mapping.complete(),
+          ["<CR>"] = cmp.mapping.confirm({
+            behavior = cmp.ConfirmBehavior.Replace,
+            select = true,
+          }),
+          ["<Up>"] = cmp.mapping(function(fallback)
+            if cmp.visible() then
+              cmp.select_prev_item()
+            else
+              fallback()
+            end
+          end, { "i", "s" }),
+          ["<Down>"] = cmp.mapping(function(fallback)
+            if cmp.visible() then
+              cmp.select_next_item()
+            else
+              fallback()
+            end
+          end, { "i", "s" }),
+        },
+      })
+    end,
+  },
+}
diff --git a/nvim/.config/nvim/lua/plugins/copilot.lua b/nvim/.config/nvim/lua/plugins/copilot.lua
new file mode 100755
index 0000000..fc91cbf
--- /dev/null
+++ b/nvim/.config/nvim/lua/plugins/copilot.lua
@@ -0,0 +1,5 @@
+return {
+	{
+		"github/copilot.vim",
+	},
+}
diff --git a/nvim/.config/nvim/lua/plugins/dadbod.lua b/nvim/.config/nvim/lua/plugins/dadbod.lua
new file mode 100644
index 0000000..f746063
--- /dev/null
+++ b/nvim/.config/nvim/lua/plugins/dadbod.lua
@@ -0,0 +1,28 @@
+return {
+	{
+		"tpope/vim-dadbod",
+		dependencies = {
+			"kristijanhusak/vim-dadbod-completion",
+		},
+	},
+	{
+		"kristijanhusak/vim-dadbod-ui",
+		config = function()
+			vim.g.db_ui_use_nerd_fonts = 1
+			vim.keymap.set("n", "<leader>db", function()
+				vim.cmd.DBUIToggle()
+			end)
+
+			vim.api.nvim_create_autocmd("FileType", {
+				pattern = {
+					"sql",
+					"mysql",
+					"plsql",
+				},
+				callback = function()
+					require("cmp").setup.buffer({ sources = { { name = "vim-dadbod-completion" } } })
+				end,
+			})
+		end,
+	},
+}
diff --git a/nvim/.config/nvim/lua/plugins/fidget.lua b/nvim/.config/nvim/lua/plugins/fidget.lua
new file mode 100644
index 0000000..dd9c859
--- /dev/null
+++ b/nvim/.config/nvim/lua/plugins/fidget.lua
@@ -0,0 +1,8 @@
+return {
+	{
+		"j-hui/fidget.nvim",
+		config = function()
+			require("fidget").setup()
+		end,
+	},
+}
diff --git a/nvim/.config/nvim/lua/plugins/lsp.lua b/nvim/.config/nvim/lua/plugins/lsp.lua
new file mode 100755
index 0000000..4e8f2a1
--- /dev/null
+++ b/nvim/.config/nvim/lua/plugins/lsp.lua
@@ -0,0 +1,115 @@
+return {
+	{
+		"williamboman/mason.nvim",
+		lazy = false,
+		config = function()
+			require("mason").setup()
+		end,
+	},
+	{
+		"williamboman/mason-lspconfig.nvim",
+		lazy = false,
+		config = function()
+			require("mason-lspconfig").setup({
+				ensure_installed = {
+					"lua_ls",
+					"gopls",
+					"tsserver",
+				},
+			})
+		end,
+	},
+	{
+		"WhoIsSethDaniel/mason-tool-installer.nvim",
+		lazy = false,
+		config = function()
+			require("mason-tool-installer").setup({
+				ensure_installed = {
+					"stylua",
+					"golines",
+					"goimports-reviser",
+				},
+			})
+		end,
+	},
+	{
+		"neovim/nvim-lspconfig",
+		lazy = false,
+		config = function()
+			local on_attach = function(_, bufnr)
+				local nmap = function(keys, func, desc)
+					if desc then
+						desc = "LSP: " .. desc
+					end
+
+					vim.keymap.set("n", keys, func, { buffer = bufnr, desc = desc })
+				end
+
+				nmap("<leader>rn", vim.lsp.buf.rename, "[R]e[n]ame")
+				nmap("<leader>ca", vim.lsp.buf.code_action, "[C]ode [A]ction")
+				nmap("gd", vim.lsp.buf.definition, "[G]oto [D]efinition")
+				nmap("gr", require("telescope.builtin").lsp_references, "[G]oto [R]eferences")
+				nmap("gI", vim.lsp.buf.implementation, "[G]oto [I]mplementation")
+				nmap("<leader>D", vim.lsp.buf.type_definition, "Type [D]efinition")
+				nmap("<leader>ds", require("telescope.builtin").lsp_document_symbols, "[D]ocument [S]ymbols")
+				nmap("<leader>ws", require("telescope.builtin").lsp_dynamic_workspace_symbols, "[W]orkspace [S]ymbols")
+
+				-- See `:help K` for why this keymap
+				nmap("K", vim.lsp.buf.hover, "Hover Documentation")
+				nmap("<C-k>", vim.lsp.buf.signature_help, "Signature Documentation")
+
+				-- Lesser used LSP functionality
+				nmap("gD", vim.lsp.buf.declaration, "[G]oto [D]eclaration")
+				nmap("<leader>wa", vim.lsp.buf.add_workspace_folder, "[W]orkspace [A]dd Folder")
+				nmap("<leader>wr", vim.lsp.buf.remove_workspace_folder, "[W]orkspace [R]emove Folder")
+				nmap("<leader>wl", function()
+					print(vim.inspect(vim.lsp.buf.list_workspace_folders()))
+				end, "[W]orkspace [L]ist Folders")
+
+				-- Create a command `:Format` local to the LSP buffer
+				vim.api.nvim_buf_create_user_command(bufnr, "Format", function(_)
+					if vim.lsp.buf.format then
+						vim.lsp.buf.format()
+					elseif vim.lsp.buf.formatting then
+						vim.lsp.buf.formatting()
+					end
+				end, { desc = "Format current buffer with LSP" })
+			end
+
+			local capabilities = vim.lsp.protocol.make_client_capabilities()
+			capabilities = require("cmp_nvim_lsp").default_capabilities(capabilities)
+
+			local lspconfig = require("lspconfig")
+			lspconfig.lua_ls.setup({
+				on_attach = on_attach,
+				capabilities = capabilities,
+			})
+			lspconfig.gopls.setup({
+				on_attach = on_attach,
+				capabilities = capabilities,
+			})
+			lspconfig.tsserver.setup({
+				on_attach = on_attach,
+				capabilities = capabilities,
+			})
+		end,
+	},
+	{
+		"nvimtools/none-ls.nvim",
+		lazy = false,
+		config = function()
+			local null_ls = require("null-ls")
+			null_ls.setup({
+				sources = {
+					null_ls.builtins.formatting.stylua,
+					null_ls.builtins.formatting.golines.with({
+						extra_args = { "--base-formatter", "goimports-reviser", "-m", "120", "-t", "2" },
+					}),
+				},
+			})
+
+			vim.keymap.set("n", "<leader>gf", vim.lsp.buf.format, {})
+			vim.cmd([[autocmd BufWritePre * lua vim.lsp.buf.format()]])
+		end,
+	},
+}
diff --git a/nvim/.config/nvim/lua/plugins/lualine.lua b/nvim/.config/nvim/lua/plugins/lualine.lua
new file mode 100755
index 0000000..d3c0656
--- /dev/null
+++ b/nvim/.config/nvim/lua/plugins/lualine.lua
@@ -0,0 +1,13 @@
+return {
+	"nvim-lualine/lualine.nvim",
+	config = function()
+		require("lualine").setup({
+			options = {
+				globalstatus = true,
+				icons_enabled = true,
+				component_separators = "|",
+				section_separators = "",
+			},
+		})
+	end,
+}
diff --git a/nvim/.config/nvim/lua/plugins/misc.lua b/nvim/.config/nvim/lua/plugins/misc.lua
new file mode 100644
index 0000000..087a87d
--- /dev/null
+++ b/nvim/.config/nvim/lua/plugins/misc.lua
@@ -0,0 +1,9 @@
+return {
+	{
+		"numToStr/Comment.nvim",
+		lazy = false,
+		config = function()
+			require("Comment").setup()
+		end,
+	},
+}
diff --git a/nvim/.config/nvim/lua/plugins/neotree.lua b/nvim/.config/nvim/lua/plugins/neotree.lua
new file mode 100644
index 0000000..bc5aca5
--- /dev/null
+++ b/nvim/.config/nvim/lua/plugins/neotree.lua
@@ -0,0 +1,37 @@
+return {
+	{
+		"nvim-neo-tree/neo-tree.nvim",
+		branch = "v3.x",
+		dependencies = {
+			"nvim-lua/plenary.nvim",
+			"nvim-tree/nvim-web-devicons",
+			"MunifTanjim/nui.nvim",
+		},
+		config = function()
+			require("neo-tree").setup({
+				filesystem = {
+					filtered_items = {
+						visible = true,
+						hide_dotfiles = false,
+						hide_gitignored = true,
+						hide_by_name = {
+							".git",
+							"node_modules",
+						},
+					},
+				},
+			})
+			vim.cmd([[autocmd VimEnter * lua vim.cmd.Neotree("toggle")]])
+			vim.keymap.set("n", "<leader>e", function()
+				vim.cmd.Neotree("toggle")
+			end)
+			vim.keymap.set("n", "<leader>o", function()
+				if vim.bo.filetype == "neo-tree" then
+					vim.cmd.wincmd("p")
+				else
+					vim.cmd.Neotree("focus")
+				end
+			end)
+		end,
+	},
+}
diff --git a/nvim/.config/nvim/lua/plugins/newfiletemplate.lua b/nvim/.config/nvim/lua/plugins/newfiletemplate.lua
new file mode 100644
index 0000000..0d2b8c7
--- /dev/null
+++ b/nvim/.config/nvim/lua/plugins/newfiletemplate.lua
@@ -0,0 +1,8 @@
+return {
+  {
+    "otavioschwanck/new-file-template.nvim",
+    config = function()
+      require("new-file-template").setup()
+    end,
+  },
+}
diff --git a/nvim/.config/nvim/lua/plugins/telescope.lua b/nvim/.config/nvim/lua/plugins/telescope.lua
new file mode 100755
index 0000000..9d16b95
--- /dev/null
+++ b/nvim/.config/nvim/lua/plugins/telescope.lua
@@ -0,0 +1,25 @@
+return {
+	{
+		"nvim-telescope/telescope-ui-select.nvim",
+	},
+	{
+		"nvim-telescope/telescope.nvim",
+		tag = "0.1.5",
+		dependencies = { "nvim-lua/plenary.nvim" },
+		config = function()
+			require("telescope").setup({
+				extensions = {
+					["ui-select"] = {
+						require("telescope.themes").get_dropdown({}),
+					},
+				},
+			})
+			local builtin = require("telescope.builtin")
+			vim.keymap.set("n", "<leader>ff", builtin.find_files, {})
+			vim.keymap.set("n", "<leader>fg", builtin.live_grep, {})
+			vim.keymap.set("n", "<leader>fb", builtin.buffers, {})
+			vim.keymap.set("n", "<leader>fh", builtin.help_tags, {})
+			require("telescope").load_extension("ui-select")
+		end,
+	},
+}
diff --git a/nvim/.config/nvim/lua/plugins/treesitter.lua b/nvim/.config/nvim/lua/plugins/treesitter.lua
new file mode 100755
index 0000000..c76a260
--- /dev/null
+++ b/nvim/.config/nvim/lua/plugins/treesitter.lua
@@ -0,0 +1,35 @@
+return {
+	{
+		"nvim-treesitter/nvim-treesitter",
+		build = ":TSUpdate",
+		config = function()
+			local config = require("nvim-treesitter.configs")
+			config.setup({
+				ensure_installed = {
+					"lua",
+					"go",
+					"bash",
+					"comment",
+					"css",
+					"dockerfile",
+					"gitignore",
+					"gomod",
+					"gosum",
+					"gowork",
+					"gotmpl",
+					"graphql",
+					"html",
+					"javascript",
+					"json",
+					"sql",
+					"tsx",
+					"typescript",
+					"yaml",
+				},
+				auto_install = true,
+				highlight = { enable = true },
+				indent = { enable = true },
+			})
+		end,
+	},
+}
diff --git a/nvim/.config/nvim/lua/plugins/trouble.lua b/nvim/.config/nvim/lua/plugins/trouble.lua
new file mode 100644
index 0000000..d3f3651
--- /dev/null
+++ b/nvim/.config/nvim/lua/plugins/trouble.lua
@@ -0,0 +1,39 @@
+return {
+	{
+		"folke/trouble.nvim",
+		cmd = "Trouble",
+		config = function()
+			require("trouble").setup({
+				auto_open = true,
+				auto_close = false,
+				auto_preview = true,
+				auto_fold = false,
+				use_diagnostic_signs = true,
+			})
+			vim.keymap.set("n", "<leader>xx", function()
+				require("trouble").toggle()
+			end)
+			vim.keymap.set("n", "<leader>xw", function()
+				require("trouble").toggle("workspace_diagnostics")
+			end)
+			vim.keymap.set("n", "<leader>xd", function()
+				require("trouble").toggle("document_diagnostics")
+			end)
+			vim.keymap.set("n", "<leader>xq", function()
+				require("trouble").toggle("quickfix")
+			end)
+			vim.keymap.set("n", "<leader>xl", function()
+				require("trouble").toggle("loclist")
+			end)
+			vim.keymap.set("n", "gR", function()
+				require("trouble").toggle("lsp_references")
+			end)
+			vim.keymap.set("n", "<leader>x<Right>", function()
+				require("trouble").next({ skip_groups = true, jump = true })
+			end)
+			vim.keymap.set("n", "<leader>x<Left>", function()
+				require("trouble").previous({ skip_groups = true, jump = true })
+			end)
+		end,
+	},
+}
diff --git a/nvim/.config/nvim/lua/plugins/whichkey.lua b/nvim/.config/nvim/lua/plugins/whichkey.lua
new file mode 100644
index 0000000..a01b2b8
--- /dev/null
+++ b/nvim/.config/nvim/lua/plugins/whichkey.lua
@@ -0,0 +1,21 @@
+return {
+  "folke/which-key.nvim",
+  opts = {
+    plugins = {
+      marks = true,   -- shows a list of your marks on ' and `
+      registers = false, -- shows your registers on " in NORMAL or <C-r> in INSERT mode
+      spelling = {
+        enabled = false, -- enabling this will show WhichKey when pressing z= to select spelling suggestions
+      },
+      presets = {
+        operators = false, -- adds help for operators like d, y, ...
+        motions = false,  -- adds help for motions
+        text_objects = false, -- help for text objects triggered after entering an operator
+        windows = true,   -- default bindings on <c-w>
+        nav = false,      -- misc bindings to work with windows
+        z = true,         -- bindings for folds, spelling and others prefixed with z
+        g = true,         -- bindings for prefixed with g
+      },
+    },
+  },
+}
diff --git a/nvim/.config/nvim/lua/templates/go.lua b/nvim/.config/nvim/lua/templates/go.lua
new file mode 100644
index 0000000..2237cf7
--- /dev/null
+++ b/nvim/.config/nvim/lua/templates/go.lua
@@ -0,0 +1,14 @@
+local utils = require("new-file-template.utils")
+
+return function(opts)
+	local function base_template(path)
+		local foldername = path:match("([^/]+)[/]?$")
+		return [[package ]] .. foldername .. [[\n\n|cursor|]]
+	end
+
+	local template = {
+		{ pattern = ".*", content = base_template },
+	}
+
+	return utils.find_entry(template, opts)
+end
diff --git a/nvim/.config/nvim/lua/user/init.lua b/nvim/.config/nvim/lua/user/init.lua
new file mode 100755
index 0000000..ef22b23
--- /dev/null
+++ b/nvim/.config/nvim/lua/user/init.lua
@@ -0,0 +1,3 @@
+require("user.options")
+require("user.lazy")
+require("user.keymaps")
diff --git a/nvim/.config/nvim/lua/user/keymaps.lua b/nvim/.config/nvim/lua/user/keymaps.lua
new file mode 100644
index 0000000..bd3f03d
--- /dev/null
+++ b/nvim/.config/nvim/lua/user/keymaps.lua
@@ -0,0 +1,6 @@
+vim.keymap.set("n", "<leader><Left>", function()
+  vim.cmd.bprev()
+end)
+vim.keymap.set("n", "<leader><Right>", function()
+  vim.cmd.bnext()
+end)
diff --git a/nvim/.config/nvim/lua/user/lazy.lua b/nvim/.config/nvim/lua/user/lazy.lua
new file mode 100755
index 0000000..aa5bb53
--- /dev/null
+++ b/nvim/.config/nvim/lua/user/lazy.lua
@@ -0,0 +1,22 @@
+local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
+if not vim.loop.fs_stat(lazypath) then
+	vim.fn.system({
+		"git",
+		"clone",
+		"--filter=blob:none",
+		"https://github.com/folke/lazy.nvim.git",
+		"--branch=stable", -- latest stable release
+		lazypath,
+	})
+end
+
+vim.opt.rtp:prepend(lazypath)
+
+require("lazy").setup({
+	{ import = "plugins" },
+}, {
+	change_detection = {
+		enabled = true,
+		notify = false,
+	},
+})
diff --git a/nvim/.config/nvim/lua/user/options.lua b/nvim/.config/nvim/lua/user/options.lua
new file mode 100755
index 0000000..4c6ac29
--- /dev/null
+++ b/nvim/.config/nvim/lua/user/options.lua
@@ -0,0 +1,83 @@
+-- Enable relative line numbers
+vim.opt.nu = true
+vim.opt.rnu = true
+
+-- Set tabs to 2 spaces
+vim.opt.tabstop = 2
+vim.opt.softtabstop = 2
+vim.opt.expandtab = true
+
+-- Enable auto indenting and set it to spaces
+vim.opt.smartindent = true
+vim.opt.shiftwidth = 2
+
+-- Enable smart indenting (see https://stackoverflow.com/questions/1204149/smart-wrap-in-vim)
+vim.opt.breakindent = true
+
+-- Enable incremental searching
+vim.opt.incsearch = true
+vim.opt.hlsearch = true
+
+-- Disable text wrap
+vim.opt.wrap = false
+
+-- Set leader key to space
+vim.g.mapleader = " "
+vim.g.maplocalleader = " "
+
+-- Better splitting
+vim.opt.splitbelow = true
+vim.opt.splitright = true
+
+-- Enable mouse mode
+vim.opt.mouse = "a"
+
+-- Enable ignorecase + smartcase for better searching
+vim.opt.ignorecase = true
+vim.opt.smartcase = true
+
+-- Decrease updatetime to 200ms
+vim.opt.updatetime = 50
+
+-- Set completeopt to have a better completion experience
+vim.opt.completeopt = { "menuone", "noselect" }
+
+-- Enable persistent undo history
+vim.opt.undofile = true
+
+-- Enable 24-bit color
+vim.opt.termguicolors = true
+
+-- Enable the sign column to prevent the screen from jumping
+vim.opt.signcolumn = "yes"
+
+-- Enable access to System Clipboard
+vim.opt.clipboard = "unnamed,unnamedplus"
+
+-- Enable cursor line highlight
+vim.opt.cursorline = true
+
+-- Set fold settings
+-- These options were reccommended by nvim-ufo
+-- See: https://github.com/kevinhwang91/nvim-ufo#minimal-configuration
+vim.opt.foldcolumn = "0"
+vim.opt.foldlevel = 99
+vim.opt.foldlevelstart = 99
+vim.opt.foldenable = true
+
+-- Always keep 8 lines above/below cursor unless at start/end of file
+vim.opt.scrolloff = 8
+
+-- Place a column line
+vim.opt.colorcolumn = "120"
+
+vim.opt.guicursor = {
+	"n-v-c:block", -- Normal, visual, command-line: block cursor
+	"i-ci-ve:ver25", -- Insert, command-line insert, visual-exclude: vertical bar cursor with 25% width
+	"r-cr:hor20", -- Replace, command-line replace: horizontal bar cursor with 20% height
+	"o:hor50", -- Operator-pending: horizontal bar cursor with 50% height
+	"a:blinkwait700-blinkoff400-blinkon250", -- All modes: blinking settings
+	"sm:block-blinkwait175-blinkoff150-blinkon175", -- Showmatch: block cursor with specific blinking settings
+}
+
+vim.g.db = "postgres://sorare:sorare@192.168.1.250:5436/sorare?sslmode=disable"
diff --git a/polybar/.config/polybar/config.ini b/polybar/.config/polybar/config.ini
new file mode 100644
index 0000000..b3dd441
--- /dev/null
+++ b/polybar/.config/polybar/config.ini
@@ -0,0 +1,203 @@
+;==========================================================
+;
+;
+;   ██████╗  ██████╗ ██╗  ██╗   ██╗██████╗  █████╗ ██████╗
+;   ██╔══██╗██╔═══██╗██║  ╚██╗ ██╔╝██╔══██╗██╔══██╗██╔══██╗
+;   ██████╔╝██║   ██║██║   ╚████╔╝ ██████╔╝███████║██████╔╝
+;   ██╔═══╝ ██║   ██║██║    ╚██╔╝  ██╔══██╗██╔══██║██╔══██╗
+;   ██║     ╚██████╔╝███████╗██║   ██████╔╝██║  ██║██║  ██║
+;   ╚═╝      ╚═════╝ ╚══════╝╚═╝   ╚═════╝ ╚═╝  ╚═╝╚═╝  ╚═╝
+;
+;
+;   To learn more about how to configure Polybar
+;   go to https://github.com/polybar/polybar
+;
+;   The README contains a lot of information
+;
+;==========================================================
+
+[colors]
+background = #282A2E
+background-alt = #373B41
+foreground = #C5C8C6
+primary = #F0C674
+secondary = #8ABEB7
+alert = #A54242
+disabled = #707880
+rosewater = #f5e0dc
+flamingo = #f2cdcd
+pink = #f5c2e7
+mauve = #cba6f7
+red = #f38ba8
+maroon = #eba0ac
+peach = #fab387
+yellow = #f9e2af
+green = #a6e3a1
+teal = #94e2d5
+sky = #89dceb
+sapphire = #74c7ec
+blue = #89b4fa
+lavender = #b4befe
+text = #cdd6f4
+subtext1 = #bac2de
+subtext0 = #a6adc8
+overlay2 = #9399b2
+overlay1 = #7f849c
+overlay0 = #6c7086
+surface2 = #585b70
+surface1 = #45475a
+surface0 = #313244
+base = #1e1e2e
+mantle = #181825
+crust = #11111b
+transparent = #FF00000
+
+[bar/top]
+width = 100%
+height = 24pt
+radius = 6
+
+; dpi = 96
+
+background = ${colors.base}
+foreground = ${colors.text}
+
+line-size = 3pt
+
+border-size = 4pt
+border-color = ${colors.crust}
+
+padding-left = 0
+padding-right = 1
+
+module-margin = 1
+
+separator = |
+separator-foreground = ${colors.disabled}
+
+font-0 = FiraCode Nerd Font Mono;2
+
+modules-left = xworkspaces xwindow
+modules-right = filesystem pulseaudio xkeyboard memory cpu wlan eth date
+
+cursor-click = pointer
+cursor-scroll = ns-resize
+
+enable-ipc = true
+
+; wm-restack = generic
+; wm-restack = bspwm
+; wm-restack = i3
+
+; override-redirect = true
+
+[module/systray]
+type = internal/tray
+
+format-margin = 8pt
+tray-spacing = 16pt
+
+[module/xworkspaces]
+type = internal/xworkspaces
+
+label-active = %name%
+label-active-background = ${colors.background-alt}
+label-active-underline= ${colors.primary}
+label-active-padding = 1
+
+label-occupied = %name%
+label-occupied-padding = 1
+
+label-urgent = %name%
+label-urgent-background = ${colors.alert}
+label-urgent-padding = 1
+
+label-empty = %name%
+label-empty-foreground = ${colors.disabled}
+label-empty-padding = 1
+
+[module/xwindow]
+type = internal/xwindow
+label = %title:0:60:...%
+
+[module/filesystem]
+type = internal/fs
+interval = 25
+
+mount-0 = /
+
+label-mounted = %{F#F0C674}%mountpoint%%{F-} %percentage_used%%
+
+label-unmounted = %mountpoint% not mounted
+label-unmounted-foreground = ${colors.disabled}
+
+[module/pulseaudio]
+type = internal/pulseaudio
+
+format-volume-prefix = "VOL "
+format-volume-prefix-foreground = ${colors.primary}
+format-volume = <label-volume>
+
+label-volume = %percentage%%
+
+label-muted = muted
+label-muted-foreground = ${colors.disabled}
+
+[module/xkeyboard]
+type = internal/xkeyboard
+blacklist-0 = num lock
+
+label-layout = %layout%
+label-layout-foreground = ${colors.primary}
+
+label-indicator-padding = 2
+label-indicator-margin = 1
+label-indicator-foreground = ${colors.background}
+label-indicator-background = ${colors.secondary}
+
+[module/memory]
+type = internal/memory
+interval = 2
+format-prefix = "RAM "
+format-prefix-foreground = ${colors.primary}
+label = %percentage_used:2%%
+
+[module/cpu]
+type = internal/cpu
+interval = 2
+format-prefix = "CPU "
+format-prefix-foreground = ${colors.primary}
+label = %percentage:2%%
+
+[network-base]
+type = internal/network
+interval = 5
+format-connected = <label-connected>
+format-disconnected = <label-disconnected>
+label-disconnected = %{F#F0C674}%ifname%%{F#707880} disconnected
+
+[module/wlan]
+inherit = network-base
+interface-type = wireless
+label-connected = %{F#F0C674}%ifname%%{F-} %essid% %local_ip%
+
+[module/eth]
+inherit = network-base
+interface-type = wired
+label-connected = %{F#F0C674}%ifname%%{F-} %local_ip%
+
+[module/date]
+type = internal/date
+interval = 1
+
+date = %H:%M
+date-alt = %Y-%m-%d %H:%M:%S
+
+label = %date%
+label-foreground = ${colors.primary}
+
+[settings]
+screenchange-reload = true
+pseudo-transparency = true
+
+; vim:ft=dosini
diff --git a/polybar/.config/polybar/launch.sh b/polybar/.config/polybar/launch.sh
new file mode 100755
index 0000000..a61c0a2
--- /dev/null
+++ b/polybar/.config/polybar/launch.sh
@@ -0,0 +1,14 @@
+#!/bin/sh
+
+# Terminate already running bar instances
+killall -q polybar
+
+# Wait until the processes have been shut down
+while pgrep -u $UID -x polybar >/dev/null; do sleep 1; done
+
+# Launch bar1 and bar2
+MONITORS=$(xrandr --query | grep " connected" | cut -d" " -f1)
+
+MONITORS=$MONITORS polybar top;
+
+echo "Bars launched..."
diff --git a/zsh/.p10k.zsh b/zsh/.p10k.zsh
new file mode 100644
index 0000000..b589196
--- /dev/null
+++ b/zsh/.p10k.zsh
@@ -0,0 +1,1842 @@
+# Generated by Powerlevel10k configuration wizard on 2024-05-22 at 12:56 +04.
+# Based on romkatv/powerlevel10k/config/p10k-rainbow.zsh, checksum 44011.
+# Wizard options: nerdfont-v3 + powerline, small icons, rainbow, unicode, 24h time,
+# angled separators, sharp heads, flat tails, 2 lines, disconnected, no frame, sparse,
+# many icons, concise, transient_prompt, instant_prompt=verbose.
+# Type `p10k configure` to generate another config.
+#
+# Config for Powerlevel10k with powerline prompt style with colorful background.
+# Type `p10k configure` to generate your own config based on it.
+#
+# Tip: Looking for a nice color? Here's a one-liner to print colormap.
+#
+#   for i in {0..255}; do print -Pn "%K{$i}  %k%F{$i}${(l:3::0:)i}%f " ${${(M)$((i%6)):#3}:+$'\n'}; done
+
+# Temporarily change options.
+'builtin' 'local' '-a' 'p10k_config_opts'
+[[ ! -o 'aliases'         ]] || p10k_config_opts+=('aliases')
+[[ ! -o 'sh_glob'         ]] || p10k_config_opts+=('sh_glob')
+[[ ! -o 'no_brace_expand' ]] || p10k_config_opts+=('no_brace_expand')
+'builtin' 'setopt' 'no_aliases' 'no_sh_glob' 'brace_expand'
+
+() {
+  emulate -L zsh -o extended_glob
+
+  # Unset all configuration options. This allows you to apply configuration changes without
+  # restarting zsh. Edit ~/.p10k.zsh and type `source ~/.p10k.zsh`.
+  unset -m '(POWERLEVEL9K_*|DEFAULT_USER)~POWERLEVEL9K_GITSTATUS_DIR'
+
+  # Zsh >= 5.1 is required.
+  [[ $ZSH_VERSION == (5.<1->*|<6->.*) ]] || return
+
+  # The list of segments shown on the left. Fill it with the most important segments.
+  typeset -g POWERLEVEL9K_LEFT_PROMPT_ELEMENTS=(
+    # =========================[ Line #1 ]=========================
+    os_icon                 # os identifier
+    dir                     # current directory
+    vcs                     # git status
+    # =========================[ Line #2 ]=========================
+    newline                 # \n
+    prompt_char             # prompt symbol
+  )
+
+  # The list of segments shown on the right. Fill it with less important segments.
+  # Right prompt on the last prompt line (where you are typing your commands) gets
+  # automatically hidden when the input line reaches it. Right prompt above the
+  # last prompt line gets hidden if it would overlap with left prompt.
+  typeset -g POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=(
+    # =========================[ Line #1 ]=========================
+    status                  # exit code of the last command
+    command_execution_time  # duration of the last command
+    background_jobs         # presence of background jobs
+    direnv                  # direnv status (https://direnv.net/)
+    asdf                    # asdf version manager (https://github.com/asdf-vm/asdf)
+    virtualenv              # python virtual environment (https://docs.python.org/3/library/venv.html)
+    anaconda                # conda environment (https://conda.io/)
+    pyenv                   # python environment (https://github.com/pyenv/pyenv)
+    goenv                   # go environment (https://github.com/syndbg/goenv)
+    nodenv                  # node.js version from nodenv (https://github.com/nodenv/nodenv)
+    nvm                     # node.js version from nvm (https://github.com/nvm-sh/nvm)
+    nodeenv                 # node.js environment (https://github.com/ekalinin/nodeenv)
+    # node_version          # node.js version
+    # go_version            # go version (https://golang.org)
+    # rust_version          # rustc version (https://www.rust-lang.org)
+    # dotnet_version        # .NET version (https://dotnet.microsoft.com)
+    # php_version           # php version (https://www.php.net/)
+    # laravel_version       # laravel php framework version (https://laravel.com/)
+    # java_version          # java version (https://www.java.com/)
+    # package               # name@version from package.json (https://docs.npmjs.com/files/package.json)
+    rbenv                   # ruby version from rbenv (https://github.com/rbenv/rbenv)
+    rvm                     # ruby version from rvm (https://rvm.io)
+    fvm                     # flutter version management (https://github.com/leoafarias/fvm)
+    luaenv                  # lua version from luaenv (https://github.com/cehoffman/luaenv)
+    jenv                    # java version from jenv (https://github.com/jenv/jenv)
+    plenv                   # perl version from plenv (https://github.com/tokuhirom/plenv)
+    perlbrew                # perl version from perlbrew (https://github.com/gugod/App-perlbrew)
+    phpenv                  # php version from phpenv (https://github.com/phpenv/phpenv)
+    scalaenv                # scala version from scalaenv (https://github.com/scalaenv/scalaenv)
+    haskell_stack           # haskell version from stack (https://haskellstack.org/)
+    kubecontext             # current kubernetes context (https://kubernetes.io/)
+    terraform               # terraform workspace (https://www.terraform.io)
+    # terraform_version     # terraform version (https://www.terraform.io)
+    aws                     # aws profile (https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html)
+    aws_eb_env              # aws elastic beanstalk environment (https://aws.amazon.com/elasticbeanstalk/)
+    azure                   # azure account name (https://docs.microsoft.com/en-us/cli/azure)
+    gcloud                  # google cloud cli account and project (https://cloud.google.com/)
+    google_app_cred         # google application credentials (https://cloud.google.com/docs/authentication/production)
+    toolbox                 # toolbox name (https://github.com/containers/toolbox)
+    context                 # user@hostname
+    nordvpn                 # nordvpn connection status, linux only (https://nordvpn.com/)
+    ranger                  # ranger shell (https://github.com/ranger/ranger)
+    yazi                    # yazi shell (https://github.com/sxyazi/yazi)
+    nnn                     # nnn shell (https://github.com/jarun/nnn)
+    lf                      # lf shell (https://github.com/gokcehan/lf)
+    xplr                    # xplr shell (https://github.com/sayanarijit/xplr)
+    vim_shell               # vim shell indicator (:sh)
+    midnight_commander      # midnight commander shell (https://midnight-commander.org/)
+    nix_shell               # nix shell (https://nixos.org/nixos/nix-pills/developing-with-nix-shell.html)
+    chezmoi_shell           # chezmoi shell (https://www.chezmoi.io/)
+    # vi_mode               # vi mode (you don't need this if you've enabled prompt_char)
+    # vpn_ip                # virtual private network indicator
+    # load                  # CPU load
+    # disk_usage            # disk usage
+    # ram                   # free RAM
+    # swap                  # used swap
+    todo                    # todo items (https://github.com/todotxt/todo.txt-cli)
+    timewarrior             # timewarrior tracking status (https://timewarrior.net/)
+    taskwarrior             # taskwarrior task count (https://taskwarrior.org/)
+    per_directory_history   # Oh My Zsh per-directory-history local/global indicator
+    # cpu_arch              # CPU architecture
+    time                    # current time
+    # =========================[ Line #2 ]=========================
+    newline
+    # ip                    # ip address and bandwidth usage for a specified network interface
+    # public_ip             # public IP address
+    # proxy                 # system-wide http/https/ftp proxy
+    # battery               # internal battery
+    # wifi                  # wifi speed
+    # example               # example user-defined segment (see prompt_example function below)
+  )
+
+  # Defines character set used by powerlevel10k. It's best to let `p10k configure` set it for you.
+  typeset -g POWERLEVEL9K_MODE=nerdfont-v3
+  # When set to `moderate`, some icons will have an extra space after them. This is meant to avoid
+  # icon overlap when using non-monospace fonts. When set to `none`, spaces are not added.
+  typeset -g POWERLEVEL9K_ICON_PADDING=none
+
+  # When set to true, icons appear before content on both sides of the prompt. When set
+  # to false, icons go after content. If empty or not set, icons go before content in the left
+  # prompt and after content in the right prompt.
+  #
+  # You can also override it for a specific segment:
+  #
+  #   POWERLEVEL9K_STATUS_ICON_BEFORE_CONTENT=false
+  #
+  # Or for a specific segment in specific state:
+  #
+  #   POWERLEVEL9K_DIR_NOT_WRITABLE_ICON_BEFORE_CONTENT=false
+  typeset -g POWERLEVEL9K_ICON_BEFORE_CONTENT=
+
+  # Add an empty line before each prompt.
+  typeset -g POWERLEVEL9K_PROMPT_ADD_NEWLINE=true
+
+  # Connect left prompt lines with these symbols. You'll probably want to use the same color
+  # as POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND below.
+  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_PREFIX=
+  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_PREFIX=
+  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_PREFIX=
+  # Connect right prompt lines with these symbols.
+  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_SUFFIX=
+  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_SUFFIX=
+  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_SUFFIX=
+
+  # Filler between left and right prompt on the first prompt line. You can set it to ' ', '·' or
+  # '─'. The last two make it easier to see the alignment between left and right prompt and to
+  # separate prompt from command output. You might want to set POWERLEVEL9K_PROMPT_ADD_NEWLINE=false
+  # for more compact prompt if using this option.
+  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR=' '
+  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_BACKGROUND=
+  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_GAP_BACKGROUND=
+  if [[ $POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR != ' ' ]]; then
+    # The color of the filler. You'll probably want to match the color of POWERLEVEL9K_MULTILINE
+    # ornaments defined above.
+    typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND=242
+    # Start filler from the edge of the screen if there are no left segments on the first line.
+    typeset -g POWERLEVEL9K_EMPTY_LINE_LEFT_PROMPT_FIRST_SEGMENT_END_SYMBOL='%{%}'
+    # End filler on the edge of the screen if there are no right segments on the first line.
+    typeset -g POWERLEVEL9K_EMPTY_LINE_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='%{%}'
+  fi
+
+  # Separator between same-color segments on the left.
+  typeset -g POWERLEVEL9K_LEFT_SUBSEGMENT_SEPARATOR='\uE0B1'
+  # Separator between same-color segments on the right.
+  typeset -g POWERLEVEL9K_RIGHT_SUBSEGMENT_SEPARATOR='\uE0B3'
+  # Separator between different-color segments on the left.
+  typeset -g POWERLEVEL9K_LEFT_SEGMENT_SEPARATOR='\uE0B0'
+  # Separator between different-color segments on the right.
+  typeset -g POWERLEVEL9K_RIGHT_SEGMENT_SEPARATOR='\uE0B2'
+  # To remove a separator between two segments, add "_joined" to the second segment name.
+  # For example: POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=(os_icon context_joined)
+
+  # The right end of left prompt.
+  typeset -g POWERLEVEL9K_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL='\uE0B0'
+  # The left end of right prompt.
+  typeset -g POWERLEVEL9K_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='\uE0B2'
+  # The left end of left prompt.
+  typeset -g POWERLEVEL9K_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=''
+  # The right end of right prompt.
+  typeset -g POWERLEVEL9K_RIGHT_PROMPT_LAST_SEGMENT_END_SYMBOL=''
+  # Left prompt terminator for lines without any segments.
+  typeset -g POWERLEVEL9K_EMPTY_LINE_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=
+
+  #################################[ os_icon: os identifier ]##################################
+  # OS identifier color.
+  typeset -g POWERLEVEL9K_OS_ICON_FOREGROUND=232
+  typeset -g POWERLEVEL9K_OS_ICON_BACKGROUND=7
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_OS_ICON_CONTENT_EXPANSION='⭐'
+
+  ################################[ prompt_char: prompt symbol ]################################
+  # Transparent background.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_BACKGROUND=
+  # Green prompt symbol if the last command succeeded.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_OK_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=76
+  # Red prompt symbol if the last command failed.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=196
+  # Default prompt symbol.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='❯'
+  # Prompt symbol in command vi mode.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='❮'
+  # Prompt symbol in visual vi mode.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIVIS_CONTENT_EXPANSION='V'
+  # Prompt symbol in overwrite vi mode.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='▶'
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_OVERWRITE_STATE=true
+  # No line terminator if prompt_char is the last segment.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=
+  # No line introducer if prompt_char is the first segment.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=
+  # No surrounding whitespace.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_{LEFT,RIGHT}_WHITESPACE=
+
+  ##################################[ dir: current directory ]##################################
+  # Current directory background color.
+  typeset -g POWERLEVEL9K_DIR_BACKGROUND=4
+  # Default current directory foreground color.
+  typeset -g POWERLEVEL9K_DIR_FOREGROUND=254
+  # If directory is too long, shorten some of its segments to the shortest possible unique
+  # prefix. The shortened directory can be tab-completed to the original.
+  typeset -g POWERLEVEL9K_SHORTEN_STRATEGY=truncate_to_unique
+  # Replace removed segment suffixes with this symbol.
+  typeset -g POWERLEVEL9K_SHORTEN_DELIMITER=
+  # Color of the shortened directory segments.
+  typeset -g POWERLEVEL9K_DIR_SHORTENED_FOREGROUND=250
+  # Color of the anchor directory segments. Anchor segments are never shortened. The first
+  # segment is always an anchor.
+  typeset -g POWERLEVEL9K_DIR_ANCHOR_FOREGROUND=255
+  # Display anchor directory segments in bold.
+  typeset -g POWERLEVEL9K_DIR_ANCHOR_BOLD=true
+  # Don't shorten directories that contain any of these files. They are anchors.
+  local anchor_files=(
+    .bzr
+    .citc
+    .git
+    .hg
+    .node-version
+    .python-version
+    .go-version
+    .ruby-version
+    .lua-version
+    .java-version
+    .perl-version
+    .php-version
+    .tool-versions
+    .shorten_folder_marker
+    .svn
+    .terraform
+    CVS
+    Cargo.toml
+    composer.json
+    go.mod
+    package.json
+    stack.yaml
+  )
+  typeset -g POWERLEVEL9K_SHORTEN_FOLDER_MARKER="(${(j:|:)anchor_files})"
+  # If set to "first" ("last"), remove everything before the first (last) subdirectory that contains
+  # files matching $POWERLEVEL9K_SHORTEN_FOLDER_MARKER. For example, when the current directory is
+  # /foo/bar/git_repo/nested_git_repo/baz, prompt will display git_repo/nested_git_repo/baz (first)
+  # or nested_git_repo/baz (last). This assumes that git_repo and nested_git_repo contain markers
+  # and other directories don't.
+  #
+  # Optionally, "first" and "last" can be followed by ":<offset>" where <offset> is an integer.
+  # This moves the truncation point to the right (positive offset) or to the left (negative offset)
+  # relative to the marker. Plain "first" and "last" are equivalent to "first:0" and "last:0"
+  # respectively.
+  typeset -g POWERLEVEL9K_DIR_TRUNCATE_BEFORE_MARKER=false
+  # Don't shorten this many last directory segments. They are anchors.
+  typeset -g POWERLEVEL9K_SHORTEN_DIR_LENGTH=1
+  # Shorten directory if it's longer than this even if there is space for it. The value can
+  # be either absolute (e.g., '80') or a percentage of terminal width (e.g, '50%'). If empty,
+  # directory will be shortened only when prompt doesn't fit or when other parameters demand it
+  # (see POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS and POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT below).
+  # If set to `0`, directory will always be shortened to its minimum length.
+  typeset -g POWERLEVEL9K_DIR_MAX_LENGTH=80
+  # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least this
+  # many columns for typing commands.
+  typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS=40
+  # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least
+  # COLUMNS * POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT * 0.01 columns for typing commands.
+  typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT=50
+  # If set to true, embed a hyperlink into the directory. Useful for quickly
+  # opening a directory in the file manager simply by clicking the link.
+  # Can also be handy when the directory is shortened, as it allows you to see
+  # the full directory that was used in previous commands.
+  typeset -g POWERLEVEL9K_DIR_HYPERLINK=false
+
+  # Enable special styling for non-writable and non-existent directories. See POWERLEVEL9K_LOCK_ICON
+  # and POWERLEVEL9K_DIR_CLASSES below.
+  typeset -g POWERLEVEL9K_DIR_SHOW_WRITABLE=v3
+
+  # The default icon shown next to non-writable and non-existent directories when
+  # POWERLEVEL9K_DIR_SHOW_WRITABLE is set to v3.
+  # typeset -g POWERLEVEL9K_LOCK_ICON='⭐'
+
+  # POWERLEVEL9K_DIR_CLASSES allows you to specify custom icons and colors for different
+  # directories. It must be an array with 3 * N elements. Each triplet consists of:
+  #
+  #   1. A pattern against which the current directory ($PWD) is matched. Matching is done with
+  #      extended_glob option enabled.
+  #   2. Directory class for the purpose of styling.
+  #   3. An empty string.
+  #
+  # Triplets are tried in order. The first triplet whose pattern matches $PWD wins.
+  #
+  # If POWERLEVEL9K_DIR_SHOW_WRITABLE is set to v3, non-writable and non-existent directories
+  # acquire class suffix _NOT_WRITABLE and NON_EXISTENT respectively.
+  #
+  # For example, given these settings:
+  #
+  #   typeset -g POWERLEVEL9K_DIR_CLASSES=(
+  #     '~/work(|/*)'  WORK     ''
+  #     '~(|/*)'       HOME     ''
+  #     '*'            DEFAULT  '')
+  #
+  # Whenever the current directory is ~/work or a subdirectory of ~/work, it gets styled with one
+  # of the following classes depending on its writability and existence: WORK, WORK_NOT_WRITABLE or
+  # WORK_NON_EXISTENT.
+  #
+  # Simply assigning classes to directories doesn't have any visible effects. It merely gives you an
+  # option to define custom colors and icons for different directory classes.
+  #
+  #   # Styling for WORK.
+  #   typeset -g POWERLEVEL9K_DIR_WORK_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  #   typeset -g POWERLEVEL9K_DIR_WORK_BACKGROUND=4
+  #   typeset -g POWERLEVEL9K_DIR_WORK_FOREGROUND=254
+  #   typeset -g POWERLEVEL9K_DIR_WORK_SHORTENED_FOREGROUND=250
+  #   typeset -g POWERLEVEL9K_DIR_WORK_ANCHOR_FOREGROUND=255
+  #
+  #   # Styling for WORK_NOT_WRITABLE.
+  #   typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  #   typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_BACKGROUND=4
+  #   typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_FOREGROUND=254
+  #   typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_SHORTENED_FOREGROUND=250
+  #   typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_ANCHOR_FOREGROUND=255
+  #
+  #   # Styling for WORK_NON_EXISTENT.
+  #   typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  #   typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_BACKGROUND=4
+  #   typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_FOREGROUND=254
+  #   typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_SHORTENED_FOREGROUND=250
+  #   typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_ANCHOR_FOREGROUND=255
+  #
+  # If a styling parameter isn't explicitly defined for some class, it falls back to the classless
+  # parameter. For example, if POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_FOREGROUND is not set, it falls
+  # back to POWERLEVEL9K_DIR_FOREGROUND.
+  #
+  # typeset -g POWERLEVEL9K_DIR_CLASSES=()
+
+  # Custom prefix.
+  # typeset -g POWERLEVEL9K_DIR_PREFIX='in '
+
+  #####################################[ vcs: git status ]######################################
+  # Version control background colors.
+  typeset -g POWERLEVEL9K_VCS_CLEAN_BACKGROUND=2
+  typeset -g POWERLEVEL9K_VCS_MODIFIED_BACKGROUND=3
+  typeset -g POWERLEVEL9K_VCS_UNTRACKED_BACKGROUND=2
+  typeset -g POWERLEVEL9K_VCS_CONFLICTED_BACKGROUND=3
+  typeset -g POWERLEVEL9K_VCS_LOADING_BACKGROUND=8
+
+  # Branch icon. Set this parameter to '\UE0A0 ' for the popular Powerline branch icon.
+  typeset -g POWERLEVEL9K_VCS_BRANCH_ICON='\uF126 '
+
+  # Untracked files icon. It's really a question mark, your font isn't broken.
+  # Change the value of this parameter to show a different icon.
+  typeset -g POWERLEVEL9K_VCS_UNTRACKED_ICON='?'
+
+  # Formatter for Git status.
+  #
+  # Example output: master wip ⇣42⇡42 *42 merge ~42 +42 !42 ?42.
+  #
+  # You can edit the function to customize how Git status looks.
+  #
+  # VCS_STATUS_* parameters are set by gitstatus plugin. See reference:
+  # https://github.com/romkatv/gitstatus/blob/master/gitstatus.plugin.zsh.
+  function my_git_formatter() {
+    emulate -L zsh
+
+    if [[ -n $P9K_CONTENT ]]; then
+      # If P9K_CONTENT is not empty, use it. It's either "loading" or from vcs_info (not from
+      # gitstatus plugin). VCS_STATUS_* parameters are not available in this case.
+      typeset -g my_git_format=$P9K_CONTENT
+      return
+    fi
+
+    # Styling for different parts of Git status.
+    local       meta='%7F' # white foreground
+    local      clean='%0F' # black foreground
+    local   modified='%0F' # black foreground
+    local  untracked='%0F' # black foreground
+    local conflicted='%1F' # red foreground
+
+    local res
+
+    if [[ -n $VCS_STATUS_LOCAL_BRANCH ]]; then
+      local branch=${(V)VCS_STATUS_LOCAL_BRANCH}
+      # If local branch name is at most 32 characters long, show it in full.
+      # Otherwise show the first 12 … the last 12.
+      # Tip: To always show local branch name in full without truncation, delete the next line.
+      (( $#branch > 32 )) && branch[13,-13]="…"  # <-- this line
+      res+="${clean}${(g::)POWERLEVEL9K_VCS_BRANCH_ICON}${branch//\%/%%}"
+    fi
+
+    if [[ -n $VCS_STATUS_TAG
+          # Show tag only if not on a branch.
+          # Tip: To always show tag, delete the next line.
+          && -z $VCS_STATUS_LOCAL_BRANCH  # <-- this line
+        ]]; then
+      local tag=${(V)VCS_STATUS_TAG}
+      # If tag name is at most 32 characters long, show it in full.
+      # Otherwise show the first 12 … the last 12.
+      # Tip: To always show tag name in full without truncation, delete the next line.
+      (( $#tag > 32 )) && tag[13,-13]="…"  # <-- this line
+      res+="${meta}#${clean}${tag//\%/%%}"
+    fi
+
+    # Display the current Git commit if there is no branch and no tag.
+    # Tip: To always display the current Git commit, delete the next line.
+    [[ -z $VCS_STATUS_LOCAL_BRANCH && -z $VCS_STATUS_TAG ]] &&  # <-- this line
+      res+="${meta}@${clean}${VCS_STATUS_COMMIT[1,8]}"
+
+    # Show tracking branch name if it differs from local branch.
+    if [[ -n ${VCS_STATUS_REMOTE_BRANCH:#$VCS_STATUS_LOCAL_BRANCH} ]]; then
+      res+="${meta}:${clean}${(V)VCS_STATUS_REMOTE_BRANCH//\%/%%}"
+    fi
+
+    # Display "wip" if the latest commit's summary contains "wip" or "WIP".
+    if [[ $VCS_STATUS_COMMIT_SUMMARY == (|*[^[:alnum:]])(wip|WIP)(|[^[:alnum:]]*) ]]; then
+      res+=" ${modified}wip"
+    fi
+
+    if (( VCS_STATUS_COMMITS_AHEAD || VCS_STATUS_COMMITS_BEHIND )); then
+      # ⇣42 if behind the remote.
+      (( VCS_STATUS_COMMITS_BEHIND )) && res+=" ${clean}⇣${VCS_STATUS_COMMITS_BEHIND}"
+      # ⇡42 if ahead of the remote; no leading space if also behind the remote: ⇣42⇡42.
+      (( VCS_STATUS_COMMITS_AHEAD && !VCS_STATUS_COMMITS_BEHIND )) && res+=" "
+      (( VCS_STATUS_COMMITS_AHEAD  )) && res+="${clean}⇡${VCS_STATUS_COMMITS_AHEAD}"
+    elif [[ -n $VCS_STATUS_REMOTE_BRANCH ]]; then
+      # Tip: Uncomment the next line to display '=' if up to date with the remote.
+      # res+=" ${clean}="
+    fi
+
+    # ⇠42 if behind the push remote.
+    (( VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" ${clean}⇠${VCS_STATUS_PUSH_COMMITS_BEHIND}"
+    (( VCS_STATUS_PUSH_COMMITS_AHEAD && !VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" "
+    # ⇢42 if ahead of the push remote; no leading space if also behind: ⇠42⇢42.
+    (( VCS_STATUS_PUSH_COMMITS_AHEAD  )) && res+="${clean}⇢${VCS_STATUS_PUSH_COMMITS_AHEAD}"
+    # *42 if have stashes.
+    (( VCS_STATUS_STASHES        )) && res+=" ${clean}*${VCS_STATUS_STASHES}"
+    # 'merge' if the repo is in an unusual state.
+    [[ -n $VCS_STATUS_ACTION     ]] && res+=" ${conflicted}${VCS_STATUS_ACTION}"
+    # ~42 if have merge conflicts.
+    (( VCS_STATUS_NUM_CONFLICTED )) && res+=" ${conflicted}~${VCS_STATUS_NUM_CONFLICTED}"
+    # +42 if have staged changes.
+    (( VCS_STATUS_NUM_STAGED     )) && res+=" ${modified}+${VCS_STATUS_NUM_STAGED}"
+    # !42 if have unstaged changes.
+    (( VCS_STATUS_NUM_UNSTAGED   )) && res+=" ${modified}!${VCS_STATUS_NUM_UNSTAGED}"
+    # ?42 if have untracked files. It's really a question mark, your font isn't broken.
+    # See POWERLEVEL9K_VCS_UNTRACKED_ICON above if you want to use a different icon.
+    # Remove the next line if you don't want to see untracked files at all.
+    (( VCS_STATUS_NUM_UNTRACKED  )) && res+=" ${untracked}${(g::)POWERLEVEL9K_VCS_UNTRACKED_ICON}${VCS_STATUS_NUM_UNTRACKED}"
+    # "─" if the number of unstaged files is unknown. This can happen due to
+    # POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY (see below) being set to a non-negative number lower
+    # than the number of files in the Git index, or due to bash.showDirtyState being set to false
+    # in the repository config. The number of staged and untracked files may also be unknown
+    # in this case.
+    (( VCS_STATUS_HAS_UNSTAGED == -1 )) && res+=" ${modified}─"
+
+    typeset -g my_git_format=$res
+  }
+  functions -M my_git_formatter 2>/dev/null
+
+  # Don't count the number of unstaged, untracked and conflicted files in Git repositories with
+  # more than this many files in the index. Negative value means infinity.
+  #
+  # If you are working in Git repositories with tens of millions of files and seeing performance
+  # sagging, try setting POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY to a number lower than the output
+  # of `git ls-files | wc -l`. Alternatively, add `bash.showDirtyState = false` to the repository's
+  # config: `git config bash.showDirtyState false`.
+  typeset -g POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY=-1
+
+  # Don't show Git status in prompt for repositories whose workdir matches this pattern.
+  # For example, if set to '~', the Git repository at $HOME/.git will be ignored.
+  # Multiple patterns can be combined with '|': '~(|/foo)|/bar/baz/*'.
+  typeset -g POWERLEVEL9K_VCS_DISABLED_WORKDIR_PATTERN='~'
+
+  # Disable the default Git status formatting.
+  typeset -g POWERLEVEL9K_VCS_DISABLE_GITSTATUS_FORMATTING=true
+  # Install our own Git status formatter.
+  typeset -g POWERLEVEL9K_VCS_CONTENT_EXPANSION='${$((my_git_formatter()))+${my_git_format}}'
+  # Enable counters for staged, unstaged, etc.
+  typeset -g POWERLEVEL9K_VCS_{STAGED,UNSTAGED,UNTRACKED,CONFLICTED,COMMITS_AHEAD,COMMITS_BEHIND}_MAX_NUM=-1
+
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # Custom prefix.
+  # typeset -g POWERLEVEL9K_VCS_PREFIX='on '
+
+  # Show status of repositories of these types. You can add svn and/or hg if you are
+  # using them. If you do, your prompt may become slow even when your current directory
+  # isn't in an svn or hg repository.
+  typeset -g POWERLEVEL9K_VCS_BACKENDS=(git)
+
+  ##########################[ status: exit code of the last command ]###########################
+  # Enable OK_PIPE, ERROR_PIPE and ERROR_SIGNAL status states to allow us to enable, disable and
+  # style them independently from the regular OK and ERROR state.
+  typeset -g POWERLEVEL9K_STATUS_EXTENDED_STATES=true
+
+  # Status on success. No content, just an icon. No need to show it if prompt_char is enabled as
+  # it will signify success by turning green.
+  typeset -g POWERLEVEL9K_STATUS_OK=false
+  typeset -g POWERLEVEL9K_STATUS_OK_VISUAL_IDENTIFIER_EXPANSION='✔'
+  typeset -g POWERLEVEL9K_STATUS_OK_FOREGROUND=2
+  typeset -g POWERLEVEL9K_STATUS_OK_BACKGROUND=0
+
+  # Status when some part of a pipe command fails but the overall exit status is zero. It may look
+  # like this: 1|0.
+  typeset -g POWERLEVEL9K_STATUS_OK_PIPE=true
+  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_VISUAL_IDENTIFIER_EXPANSION='✔'
+  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_FOREGROUND=2
+  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_BACKGROUND=0
+
+  # Status when it's just an error code (e.g., '1'). No need to show it if prompt_char is enabled as
+  # it will signify error by turning red.
+  typeset -g POWERLEVEL9K_STATUS_ERROR=false
+  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='✘'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=3
+  typeset -g POWERLEVEL9K_STATUS_ERROR_BACKGROUND=1
+
+  # Status when the last command was terminated by a signal.
+  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL=true
+  # Use terse signal names: "INT" instead of "SIGINT(2)".
+  typeset -g POWERLEVEL9K_STATUS_VERBOSE_SIGNAME=false
+  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='✘'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=3
+  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_BACKGROUND=1
+
+  # Status when some part of a pipe command fails and the overall exit status is also non-zero.
+  # It may look like this: 1|0.
+  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE=true
+  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='✘'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=3
+  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_BACKGROUND=1
+
+  ###################[ command_execution_time: duration of the last command ]###################
+  # Execution time color.
+  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FOREGROUND=0
+  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_BACKGROUND=3
+  # Show duration of the last command if takes at least this many seconds.
+  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD=3
+  # Show this many fractional digits. Zero means round to seconds.
+  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PRECISION=0
+  # Duration format: 1d 2h 3m 4s.
+  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FORMAT='d h m s'
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # Custom prefix.
+  # typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PREFIX='took '
+
+  #######################[ background_jobs: presence of background jobs ]#######################
+  # Background jobs color.
+  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_FOREGROUND=6
+  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_BACKGROUND=0
+  # Don't show the number of background jobs.
+  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VERBOSE=false
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  #######################[ direnv: direnv status (https://direnv.net/) ]########################
+  # Direnv color.
+  typeset -g POWERLEVEL9K_DIRENV_FOREGROUND=3
+  typeset -g POWERLEVEL9K_DIRENV_BACKGROUND=0
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_DIRENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ###############[ asdf: asdf version manager (https://github.com/asdf-vm/asdf) ]###############
+  # Default asdf color. Only used to display tools for which there is no color override (see below).
+  # Tip:  Override these parameters for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_FOREGROUND and
+  # POWERLEVEL9K_ASDF_${TOOL}_BACKGROUND.
+  typeset -g POWERLEVEL9K_ASDF_FOREGROUND=0
+  typeset -g POWERLEVEL9K_ASDF_BACKGROUND=7
+
+  # There are four parameters that can be used to hide asdf tools. Each parameter describes
+  # conditions under which a tool gets hidden. Parameters can hide tools but not unhide them. If at
+  # least one parameter decides to hide a tool, that tool gets hidden. If no parameter decides to
+  # hide a tool, it gets shown.
+  #
+  # Special note on the difference between POWERLEVEL9K_ASDF_SOURCES and
+  # POWERLEVEL9K_ASDF_PROMPT_ALWAYS_SHOW. Consider the effect of the following commands:
+  #
+  #   asdf local  python 3.8.1
+  #   asdf global python 3.8.1
+  #
+  # After running both commands the current python version is 3.8.1 and its source is "local" as
+  # it takes precedence over "global". If POWERLEVEL9K_ASDF_PROMPT_ALWAYS_SHOW is set to false,
+  # it'll hide python version in this case because 3.8.1 is the same as the global version.
+  # POWERLEVEL9K_ASDF_SOURCES will hide python version only if the value of this parameter doesn't
+  # contain "local".
+
+  # Hide tool versions that don't come from one of these sources.
+  #
+  # Available sources:
+  #
+  # - shell   `asdf current` says "set by ASDF_${TOOL}_VERSION environment variable"
+  # - local   `asdf current` says "set by /some/not/home/directory/file"
+  # - global  `asdf current` says "set by /home/username/file"
+  #
+  # Note: If this parameter is set to (shell local global), it won't hide tools.
+  # Tip:  Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_SOURCES.
+  typeset -g POWERLEVEL9K_ASDF_SOURCES=(shell local global)
+
+  # If set to false, hide tool versions that are the same as global.
+  #
+  # Note: The name of this parameter doesn't reflect its meaning at all.
+  # Note: If this parameter is set to true, it won't hide tools.
+  # Tip:  Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_PROMPT_ALWAYS_SHOW.
+  typeset -g POWERLEVEL9K_ASDF_PROMPT_ALWAYS_SHOW=false
+
+  # If set to false, hide tool versions that are equal to "system".
+  #
+  # Note: If this parameter is set to true, it won't hide tools.
+  # Tip: Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_SHOW_SYSTEM.
+  typeset -g POWERLEVEL9K_ASDF_SHOW_SYSTEM=true
+
+  # If set to non-empty value, hide tools unless there is a file matching the specified file pattern
+  # in the current directory, or its parent directory, or its grandparent directory, and so on.
+  #
+  # Note: If this parameter is set to empty value, it won't hide tools.
+  # Note: SHOW_ON_UPGLOB isn't specific to asdf. It works with all prompt segments.
+  # Tip: Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_SHOW_ON_UPGLOB.
+  #
+  # Example: Hide nodejs version when there is no package.json and no *.js files in the current
+  # directory, in `..`, in `../..` and so on.
+  #
+  #   typeset -g POWERLEVEL9K_ASDF_NODEJS_SHOW_ON_UPGLOB='*.js|package.json'
+  typeset -g POWERLEVEL9K_ASDF_SHOW_ON_UPGLOB=
+
+  # Ruby version from asdf.
+  typeset -g POWERLEVEL9K_ASDF_RUBY_FOREGROUND=0
+  typeset -g POWERLEVEL9K_ASDF_RUBY_BACKGROUND=1
+  # typeset -g POWERLEVEL9K_ASDF_RUBY_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # typeset -g POWERLEVEL9K_ASDF_RUBY_SHOW_ON_UPGLOB='*.foo|*.bar'
+
+  # Python version from asdf.
+  typeset -g POWERLEVEL9K_ASDF_PYTHON_FOREGROUND=0
+  typeset -g POWERLEVEL9K_ASDF_PYTHON_BACKGROUND=4
+  # typeset -g POWERLEVEL9K_ASDF_PYTHON_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # typeset -g POWERLEVEL9K_ASDF_PYTHON_SHOW_ON_UPGLOB='*.foo|*.bar'
+
+  # Go version from asdf.
+  typeset -g POWERLEVEL9K_ASDF_GOLANG_FOREGROUND=0
+  typeset -g POWERLEVEL9K_ASDF_GOLANG_BACKGROUND=4
+  # typeset -g POWERLEVEL9K_ASDF_GOLANG_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # typeset -g POWERLEVEL9K_ASDF_GOLANG_SHOW_ON_UPGLOB='*.foo|*.bar'
+
+  # Node.js version from asdf.
+  typeset -g POWERLEVEL9K_ASDF_NODEJS_FOREGROUND=0
+  typeset -g POWERLEVEL9K_ASDF_NODEJS_BACKGROUND=2
+  # typeset -g POWERLEVEL9K_ASDF_NODEJS_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # typeset -g POWERLEVEL9K_ASDF_NODEJS_SHOW_ON_UPGLOB='*.foo|*.bar'
+
+  # Rust version from asdf.
+  typeset -g POWERLEVEL9K_ASDF_RUST_FOREGROUND=0
+  typeset -g POWERLEVEL9K_ASDF_RUST_BACKGROUND=208
+  # typeset -g POWERLEVEL9K_ASDF_RUST_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # typeset -g POWERLEVEL9K_ASDF_RUST_SHOW_ON_UPGLOB='*.foo|*.bar'
+
+  # .NET Core version from asdf.
+  typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_FOREGROUND=0
+  typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_BACKGROUND=5
+  # typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_SHOW_ON_UPGLOB='*.foo|*.bar'
+
+  # Flutter version from asdf.
+  typeset -g POWERLEVEL9K_ASDF_FLUTTER_FOREGROUND=0
+  typeset -g POWERLEVEL9K_ASDF_FLUTTER_BACKGROUND=4
+  # typeset -g POWERLEVEL9K_ASDF_FLUTTER_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # typeset -g POWERLEVEL9K_ASDF_FLUTTER_SHOW_ON_UPGLOB='*.foo|*.bar'
+
+  # Lua version from asdf.
+  typeset -g POWERLEVEL9K_ASDF_LUA_FOREGROUND=0
+  typeset -g POWERLEVEL9K_ASDF_LUA_BACKGROUND=4
+  # typeset -g POWERLEVEL9K_ASDF_LUA_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # typeset -g POWERLEVEL9K_ASDF_LUA_SHOW_ON_UPGLOB='*.foo|*.bar'
+
+  # Java version from asdf.
+  typeset -g POWERLEVEL9K_ASDF_JAVA_FOREGROUND=1
+  typeset -g POWERLEVEL9K_ASDF_JAVA_BACKGROUND=7
+  # typeset -g POWERLEVEL9K_ASDF_JAVA_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # typeset -g POWERLEVEL9K_ASDF_JAVA_SHOW_ON_UPGLOB='*.foo|*.bar'
+
+  # Perl version from asdf.
+  typeset -g POWERLEVEL9K_ASDF_PERL_FOREGROUND=0
+  typeset -g POWERLEVEL9K_ASDF_PERL_BACKGROUND=4
+  # typeset -g POWERLEVEL9K_ASDF_PERL_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # typeset -g POWERLEVEL9K_ASDF_PERL_SHOW_ON_UPGLOB='*.foo|*.bar'
+
+  # Erlang version from asdf.
+  typeset -g POWERLEVEL9K_ASDF_ERLANG_FOREGROUND=0
+  typeset -g POWERLEVEL9K_ASDF_ERLANG_BACKGROUND=1
+  # typeset -g POWERLEVEL9K_ASDF_ERLANG_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # typeset -g POWERLEVEL9K_ASDF_ERLANG_SHOW_ON_UPGLOB='*.foo|*.bar'
+
+  # Elixir version from asdf.
+  typeset -g POWERLEVEL9K_ASDF_ELIXIR_FOREGROUND=0
+  typeset -g POWERLEVEL9K_ASDF_ELIXIR_BACKGROUND=5
+  # typeset -g POWERLEVEL9K_ASDF_ELIXIR_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # typeset -g POWERLEVEL9K_ASDF_ELIXIR_SHOW_ON_UPGLOB='*.foo|*.bar'
+
+  # Postgres version from asdf.
+  typeset -g POWERLEVEL9K_ASDF_POSTGRES_FOREGROUND=0
+  typeset -g POWERLEVEL9K_ASDF_POSTGRES_BACKGROUND=6
+  # typeset -g POWERLEVEL9K_ASDF_POSTGRES_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # typeset -g POWERLEVEL9K_ASDF_POSTGRES_SHOW_ON_UPGLOB='*.foo|*.bar'
+
+  # PHP version from asdf.
+  typeset -g POWERLEVEL9K_ASDF_PHP_FOREGROUND=0
+  typeset -g POWERLEVEL9K_ASDF_PHP_BACKGROUND=5
+  # typeset -g POWERLEVEL9K_ASDF_PHP_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # typeset -g POWERLEVEL9K_ASDF_PHP_SHOW_ON_UPGLOB='*.foo|*.bar'
+
+  # Haskell version from asdf.
+  typeset -g POWERLEVEL9K_ASDF_HASKELL_FOREGROUND=0
+  typeset -g POWERLEVEL9K_ASDF_HASKELL_BACKGROUND=3
+  # typeset -g POWERLEVEL9K_ASDF_HASKELL_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # typeset -g POWERLEVEL9K_ASDF_HASKELL_SHOW_ON_UPGLOB='*.foo|*.bar'
+
+  # Julia version from asdf.
+  typeset -g POWERLEVEL9K_ASDF_JULIA_FOREGROUND=0
+  typeset -g POWERLEVEL9K_ASDF_JULIA_BACKGROUND=2
+  # typeset -g POWERLEVEL9K_ASDF_JULIA_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # typeset -g POWERLEVEL9K_ASDF_JULIA_SHOW_ON_UPGLOB='*.foo|*.bar'
+
+  ##########[ nordvpn: nordvpn connection status, linux only (https://nordvpn.com/) ]###########
+  # NordVPN connection indicator color.
+  typeset -g POWERLEVEL9K_NORDVPN_FOREGROUND=7
+  typeset -g POWERLEVEL9K_NORDVPN_BACKGROUND=4
+  # Hide NordVPN connection indicator when not connected.
+  typeset -g POWERLEVEL9K_NORDVPN_{DISCONNECTED,CONNECTING,DISCONNECTING}_CONTENT_EXPANSION=
+  typeset -g POWERLEVEL9K_NORDVPN_{DISCONNECTED,CONNECTING,DISCONNECTING}_VISUAL_IDENTIFIER_EXPANSION=
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_NORDVPN_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  #################[ ranger: ranger shell (https://github.com/ranger/ranger) ]##################
+  # Ranger shell color.
+  typeset -g POWERLEVEL9K_RANGER_FOREGROUND=3
+  typeset -g POWERLEVEL9K_RANGER_BACKGROUND=0
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_RANGER_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  
+  ####################[ yazi: yazi shell (https://github.com/sxyazi/yazi) ]#####################
+  # Yazi shell color.
+  typeset -g POWERLEVEL9K_YAZI_FOREGROUND=3
+  typeset -g POWERLEVEL9K_YAZI_BACKGROUND=0
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_YAZI_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  
+  ######################[ nnn: nnn shell (https://github.com/jarun/nnn) ]#######################
+  # Nnn shell color.
+  typeset -g POWERLEVEL9K_NNN_FOREGROUND=0
+  typeset -g POWERLEVEL9K_NNN_BACKGROUND=6
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_NNN_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ######################[ lf: lf shell (https://github.com/gokcehan/lf) ]#######################
+  # lf shell color.
+  typeset -g POWERLEVEL9K_LF_FOREGROUND=0
+  typeset -g POWERLEVEL9K_LF_BACKGROUND=6
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_LF_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ##################[ xplr: xplr shell (https://github.com/sayanarijit/xplr) ]##################
+  # xplr shell color.
+  typeset -g POWERLEVEL9K_XPLR_FOREGROUND=0
+  typeset -g POWERLEVEL9K_XPLR_BACKGROUND=6
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_XPLR_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ###########################[ vim_shell: vim shell indicator (:sh) ]###########################
+  # Vim shell indicator color.
+  typeset -g POWERLEVEL9K_VIM_SHELL_FOREGROUND=0
+  typeset -g POWERLEVEL9K_VIM_SHELL_BACKGROUND=2
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_VIM_SHELL_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ######[ midnight_commander: midnight commander shell (https://midnight-commander.org/) ]######
+  # Midnight Commander shell color.
+  typeset -g POWERLEVEL9K_MIDNIGHT_COMMANDER_FOREGROUND=3
+  typeset -g POWERLEVEL9K_MIDNIGHT_COMMANDER_BACKGROUND=0
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_MIDNIGHT_COMMANDER_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  #[ nix_shell: nix shell (https://nixos.org/nixos/nix-pills/developing-with-nix-shell.html) ]##
+  # Nix shell color.
+  typeset -g POWERLEVEL9K_NIX_SHELL_FOREGROUND=0
+  typeset -g POWERLEVEL9K_NIX_SHELL_BACKGROUND=4
+
+  # Display the icon of nix_shell if PATH contains a subdirectory of /nix/store.
+  # typeset -g POWERLEVEL9K_NIX_SHELL_INFER_FROM_PATH=false
+
+  # Tip: If you want to see just the icon without "pure" and "impure", uncomment the next line.
+  # typeset -g POWERLEVEL9K_NIX_SHELL_CONTENT_EXPANSION=
+
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_NIX_SHELL_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ##################[ chezmoi_shell: chezmoi shell (https://www.chezmoi.io/) ]##################
+  # chezmoi shell color.
+  typeset -g POWERLEVEL9K_CHEZMOI_SHELL_FOREGROUND=0
+  typeset -g POWERLEVEL9K_CHEZMOI_SHELL_BACKGROUND=4
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_CHEZMOI_SHELL_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ##################################[ disk_usage: disk usage ]##################################
+  # Colors for different levels of disk usage.
+  typeset -g POWERLEVEL9K_DISK_USAGE_NORMAL_FOREGROUND=3
+  typeset -g POWERLEVEL9K_DISK_USAGE_NORMAL_BACKGROUND=0
+  typeset -g POWERLEVEL9K_DISK_USAGE_WARNING_FOREGROUND=0
+  typeset -g POWERLEVEL9K_DISK_USAGE_WARNING_BACKGROUND=3
+  typeset -g POWERLEVEL9K_DISK_USAGE_CRITICAL_FOREGROUND=7
+  typeset -g POWERLEVEL9K_DISK_USAGE_CRITICAL_BACKGROUND=1
+  # Thresholds for different levels of disk usage (percentage points).
+  typeset -g POWERLEVEL9K_DISK_USAGE_WARNING_LEVEL=90
+  typeset -g POWERLEVEL9K_DISK_USAGE_CRITICAL_LEVEL=95
+  # If set to true, hide disk usage when below $POWERLEVEL9K_DISK_USAGE_WARNING_LEVEL percent.
+  typeset -g POWERLEVEL9K_DISK_USAGE_ONLY_WARNING=false
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_DISK_USAGE_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ###########[ vi_mode: vi mode (you don't need this if you've enabled prompt_char) ]###########
+  # Foreground color.
+  typeset -g POWERLEVEL9K_VI_MODE_FOREGROUND=0
+  # Text and color for normal (a.k.a. command) vi mode.
+  typeset -g POWERLEVEL9K_VI_COMMAND_MODE_STRING=NORMAL
+  typeset -g POWERLEVEL9K_VI_MODE_NORMAL_BACKGROUND=2
+  # Text and color for visual vi mode.
+  typeset -g POWERLEVEL9K_VI_VISUAL_MODE_STRING=VISUAL
+  typeset -g POWERLEVEL9K_VI_MODE_VISUAL_BACKGROUND=4
+  # Text and color for overtype (a.k.a. overwrite and replace) vi mode.
+  typeset -g POWERLEVEL9K_VI_OVERWRITE_MODE_STRING=OVERTYPE
+  typeset -g POWERLEVEL9K_VI_MODE_OVERWRITE_BACKGROUND=3
+  # Text and color for insert vi mode.
+  typeset -g POWERLEVEL9K_VI_INSERT_MODE_STRING=
+  typeset -g POWERLEVEL9K_VI_MODE_INSERT_FOREGROUND=8
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_VI_MODE_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ######################################[ ram: free RAM ]#######################################
+  # RAM color.
+  typeset -g POWERLEVEL9K_RAM_FOREGROUND=0
+  typeset -g POWERLEVEL9K_RAM_BACKGROUND=3
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_RAM_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  #####################################[ swap: used swap ]######################################
+  # Swap color.
+  typeset -g POWERLEVEL9K_SWAP_FOREGROUND=0
+  typeset -g POWERLEVEL9K_SWAP_BACKGROUND=3
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_SWAP_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ######################################[ load: CPU load ]######################################
+  # Show average CPU load over this many last minutes. Valid values are 1, 5 and 15.
+  typeset -g POWERLEVEL9K_LOAD_WHICH=5
+  # Load color when load is under 50%.
+  typeset -g POWERLEVEL9K_LOAD_NORMAL_FOREGROUND=0
+  typeset -g POWERLEVEL9K_LOAD_NORMAL_BACKGROUND=2
+  # Load color when load is between 50% and 70%.
+  typeset -g POWERLEVEL9K_LOAD_WARNING_FOREGROUND=0
+  typeset -g POWERLEVEL9K_LOAD_WARNING_BACKGROUND=3
+  # Load color when load is over 70%.
+  typeset -g POWERLEVEL9K_LOAD_CRITICAL_FOREGROUND=0
+  typeset -g POWERLEVEL9K_LOAD_CRITICAL_BACKGROUND=1
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_LOAD_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ################[ todo: todo items (https://github.com/todotxt/todo.txt-cli) ]################
+  # Todo color.
+  typeset -g POWERLEVEL9K_TODO_FOREGROUND=0
+  typeset -g POWERLEVEL9K_TODO_BACKGROUND=8
+  # Hide todo when the total number of tasks is zero.
+  typeset -g POWERLEVEL9K_TODO_HIDE_ZERO_TOTAL=true
+  # Hide todo when the number of tasks after filtering is zero.
+  typeset -g POWERLEVEL9K_TODO_HIDE_ZERO_FILTERED=false
+
+  # Todo format. The following parameters are available within the expansion.
+  #
+  # - P9K_TODO_TOTAL_TASK_COUNT     The total number of tasks.
+  # - P9K_TODO_FILTERED_TASK_COUNT  The number of tasks after filtering.
+  #
+  # These variables correspond to the last line of the output of `todo.sh -p ls`:
+  #
+  #   TODO: 24 of 42 tasks shown
+  #
+  # Here 24 is P9K_TODO_FILTERED_TASK_COUNT and 42 is P9K_TODO_TOTAL_TASK_COUNT.
+  #
+  # typeset -g POWERLEVEL9K_TODO_CONTENT_EXPANSION='$P9K_TODO_FILTERED_TASK_COUNT'
+
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_TODO_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ###########[ timewarrior: timewarrior tracking status (https://timewarrior.net/) ]############
+  # Timewarrior color.
+  typeset -g POWERLEVEL9K_TIMEWARRIOR_FOREGROUND=255
+  typeset -g POWERLEVEL9K_TIMEWARRIOR_BACKGROUND=8
+
+  # If the tracked task is longer than 24 characters, truncate and append "…".
+  # Tip: To always display tasks without truncation, delete the following parameter.
+  # Tip: To hide task names and display just the icon when time tracking is enabled, set the
+  # value of the following parameter to "".
+  typeset -g POWERLEVEL9K_TIMEWARRIOR_CONTENT_EXPANSION='${P9K_CONTENT:0:24}${${P9K_CONTENT:24}:+…}'
+
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_TIMEWARRIOR_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ##############[ taskwarrior: taskwarrior task count (https://taskwarrior.org/) ]##############
+  # Taskwarrior color.
+  typeset -g POWERLEVEL9K_TASKWARRIOR_FOREGROUND=0
+  typeset -g POWERLEVEL9K_TASKWARRIOR_BACKGROUND=6
+
+  # Taskwarrior segment format. The following parameters are available within the expansion.
+  #
+  # - P9K_TASKWARRIOR_PENDING_COUNT   The number of pending tasks: `task +PENDING count`.
+  # - P9K_TASKWARRIOR_OVERDUE_COUNT   The number of overdue tasks: `task +OVERDUE count`.
+  #
+  # Zero values are represented as empty parameters.
+  #
+  # The default format:
+  #
+  #   '${P9K_TASKWARRIOR_OVERDUE_COUNT:+"!$P9K_TASKWARRIOR_OVERDUE_COUNT/"}$P9K_TASKWARRIOR_PENDING_COUNT'
+  #
+  # typeset -g POWERLEVEL9K_TASKWARRIOR_CONTENT_EXPANSION='$P9K_TASKWARRIOR_PENDING_COUNT'
+
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_TASKWARRIOR_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ######[ per_directory_history: Oh My Zsh per-directory-history local/global indicator ]#######
+  # Color when using local/global history.
+  typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_LOCAL_FOREGROUND=0
+  typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_LOCAL_BACKGROUND=5
+  typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_GLOBAL_FOREGROUND=0
+  typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_GLOBAL_BACKGROUND=3
+
+  # Tip: Uncomment the next two lines to hide "local"/"global" text and leave just the icon.
+  # typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_LOCAL_CONTENT_EXPANSION=''
+  # typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_GLOBAL_CONTENT_EXPANSION=''
+
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_LOCAL_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_GLOBAL_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ################################[ cpu_arch: CPU architecture ]################################
+  # CPU architecture color.
+  typeset -g POWERLEVEL9K_CPU_ARCH_FOREGROUND=0
+  typeset -g POWERLEVEL9K_CPU_ARCH_BACKGROUND=3
+
+  # Hide the segment when on a specific CPU architecture.
+  # typeset -g POWERLEVEL9K_CPU_ARCH_X86_64_CONTENT_EXPANSION=
+  # typeset -g POWERLEVEL9K_CPU_ARCH_X86_64_VISUAL_IDENTIFIER_EXPANSION=
+
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_CPU_ARCH_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ##################################[ context: user@hostname ]##################################
+  # Context color when running with privileges.
+  typeset -g POWERLEVEL9K_CONTEXT_ROOT_FOREGROUND=1
+  typeset -g POWERLEVEL9K_CONTEXT_ROOT_BACKGROUND=0
+  # Context color in SSH without privileges.
+  typeset -g POWERLEVEL9K_CONTEXT_{REMOTE,REMOTE_SUDO}_FOREGROUND=3
+  typeset -g POWERLEVEL9K_CONTEXT_{REMOTE,REMOTE_SUDO}_BACKGROUND=0
+  # Default context color (no privileges, no SSH).
+  typeset -g POWERLEVEL9K_CONTEXT_FOREGROUND=3
+  typeset -g POWERLEVEL9K_CONTEXT_BACKGROUND=0
+
+  # Context format when running with privileges: user@hostname.
+  typeset -g POWERLEVEL9K_CONTEXT_ROOT_TEMPLATE='%n@%m'
+  # Context format when in SSH without privileges: user@hostname.
+  typeset -g POWERLEVEL9K_CONTEXT_{REMOTE,REMOTE_SUDO}_TEMPLATE='%n@%m'
+  # Default context format (no privileges, no SSH): user@hostname.
+  typeset -g POWERLEVEL9K_CONTEXT_TEMPLATE='%n@%m'
+
+  # Don't show context unless running with privileges or in SSH.
+  # Tip: Remove the next line to always show context.
+  typeset -g POWERLEVEL9K_CONTEXT_{DEFAULT,SUDO}_{CONTENT,VISUAL_IDENTIFIER}_EXPANSION=
+
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_CONTEXT_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # Custom prefix.
+  # typeset -g POWERLEVEL9K_CONTEXT_PREFIX='with '
+
+  ###[ virtualenv: python virtual environment (https://docs.python.org/3/library/venv.html) ]###
+  # Python virtual environment color.
+  typeset -g POWERLEVEL9K_VIRTUALENV_FOREGROUND=0
+  typeset -g POWERLEVEL9K_VIRTUALENV_BACKGROUND=4
+  # Don't show Python version next to the virtual environment name.
+  typeset -g POWERLEVEL9K_VIRTUALENV_SHOW_PYTHON_VERSION=false
+  # If set to "false", won't show virtualenv if pyenv is already shown.
+  # If set to "if-different", won't show virtualenv if it's the same as pyenv.
+  typeset -g POWERLEVEL9K_VIRTUALENV_SHOW_WITH_PYENV=false
+  # Separate environment name from Python version only with a space.
+  typeset -g POWERLEVEL9K_VIRTUALENV_{LEFT,RIGHT}_DELIMITER=
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_VIRTUALENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  #####################[ anaconda: conda environment (https://conda.io/) ]######################
+  # Anaconda environment color.
+  typeset -g POWERLEVEL9K_ANACONDA_FOREGROUND=0
+  typeset -g POWERLEVEL9K_ANACONDA_BACKGROUND=4
+
+  # Anaconda segment format. The following parameters are available within the expansion.
+  #
+  # - CONDA_PREFIX                 Absolute path to the active Anaconda/Miniconda environment.
+  # - CONDA_DEFAULT_ENV            Name of the active Anaconda/Miniconda environment.
+  # - CONDA_PROMPT_MODIFIER        Configurable prompt modifier (see below).
+  # - P9K_ANACONDA_PYTHON_VERSION  Current python version (python --version).
+  #
+  # CONDA_PROMPT_MODIFIER can be configured with the following command:
+  #
+  #   conda config --set env_prompt '({default_env}) '
+  #
+  # The last argument is a Python format string that can use the following variables:
+  #
+  # - prefix       The same as CONDA_PREFIX.
+  # - default_env  The same as CONDA_DEFAULT_ENV.
+  # - name         The last segment of CONDA_PREFIX.
+  # - stacked_env  Comma-separated list of names in the environment stack. The first element is
+  #                always the same as default_env.
+  #
+  # Note: '({default_env}) ' is the default value of env_prompt.
+  #
+  # The default value of POWERLEVEL9K_ANACONDA_CONTENT_EXPANSION expands to $CONDA_PROMPT_MODIFIER
+  # without the surrounding parentheses, or to the last path component of CONDA_PREFIX if the former
+  # is empty.
+  typeset -g POWERLEVEL9K_ANACONDA_CONTENT_EXPANSION='${${${${CONDA_PROMPT_MODIFIER#\(}% }%\)}:-${CONDA_PREFIX:t}}'
+
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_ANACONDA_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ################[ pyenv: python environment (https://github.com/pyenv/pyenv) ]################
+  # Pyenv color.
+  typeset -g POWERLEVEL9K_PYENV_FOREGROUND=0
+  typeset -g POWERLEVEL9K_PYENV_BACKGROUND=4
+  # Hide python version if it doesn't come from one of these sources.
+  typeset -g POWERLEVEL9K_PYENV_SOURCES=(shell local global)
+  # If set to false, hide python version if it's the same as global:
+  # $(pyenv version-name) == $(pyenv global).
+  typeset -g POWERLEVEL9K_PYENV_PROMPT_ALWAYS_SHOW=false
+  # If set to false, hide python version if it's equal to "system".
+  typeset -g POWERLEVEL9K_PYENV_SHOW_SYSTEM=true
+
+  # Pyenv segment format. The following parameters are available within the expansion.
+  #
+  # - P9K_CONTENT                Current pyenv environment (pyenv version-name).
+  # - P9K_PYENV_PYTHON_VERSION   Current python version (python --version).
+  #
+  # The default format has the following logic:
+  #
+  # 1. Display just "$P9K_CONTENT" if it's equal to "$P9K_PYENV_PYTHON_VERSION" or
+  #    starts with "$P9K_PYENV_PYTHON_VERSION/".
+  # 2. Otherwise display "$P9K_CONTENT $P9K_PYENV_PYTHON_VERSION".
+  typeset -g POWERLEVEL9K_PYENV_CONTENT_EXPANSION='${P9K_CONTENT}${${P9K_CONTENT:#$P9K_PYENV_PYTHON_VERSION(|/*)}:+ $P9K_PYENV_PYTHON_VERSION}'
+
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_PYENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ################[ goenv: go environment (https://github.com/syndbg/goenv) ]################
+  # Goenv color.
+  typeset -g POWERLEVEL9K_GOENV_FOREGROUND=0
+  typeset -g POWERLEVEL9K_GOENV_BACKGROUND=4
+  # Hide go version if it doesn't come from one of these sources.
+  typeset -g POWERLEVEL9K_GOENV_SOURCES=(shell local global)
+  # If set to false, hide go version if it's the same as global:
+  # $(goenv version-name) == $(goenv global).
+  typeset -g POWERLEVEL9K_GOENV_PROMPT_ALWAYS_SHOW=false
+  # If set to false, hide go version if it's equal to "system".
+  typeset -g POWERLEVEL9K_GOENV_SHOW_SYSTEM=true
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_GOENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ##########[ nodenv: node.js version from nodenv (https://github.com/nodenv/nodenv) ]##########
+  # Nodenv color.
+  typeset -g POWERLEVEL9K_NODENV_FOREGROUND=2
+  typeset -g POWERLEVEL9K_NODENV_BACKGROUND=0
+  # Hide node version if it doesn't come from one of these sources.
+  typeset -g POWERLEVEL9K_NODENV_SOURCES=(shell local global)
+  # If set to false, hide node version if it's the same as global:
+  # $(nodenv version-name) == $(nodenv global).
+  typeset -g POWERLEVEL9K_NODENV_PROMPT_ALWAYS_SHOW=false
+  # If set to false, hide node version if it's equal to "system".
+  typeset -g POWERLEVEL9K_NODENV_SHOW_SYSTEM=true
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_NODENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ##############[ nvm: node.js version from nvm (https://github.com/nvm-sh/nvm) ]###############
+  # Nvm color.
+  typeset -g POWERLEVEL9K_NVM_FOREGROUND=0
+  typeset -g POWERLEVEL9K_NVM_BACKGROUND=5
+  # If set to false, hide node version if it's the same as default:
+  # $(nvm version current) == $(nvm version default).
+  typeset -g POWERLEVEL9K_NVM_PROMPT_ALWAYS_SHOW=false
+  # If set to false, hide node version if it's equal to "system".
+  typeset -g POWERLEVEL9K_NVM_SHOW_SYSTEM=true
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_NVM_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ############[ nodeenv: node.js environment (https://github.com/ekalinin/nodeenv) ]############
+  # Nodeenv color.
+  typeset -g POWERLEVEL9K_NODEENV_FOREGROUND=2
+  typeset -g POWERLEVEL9K_NODEENV_BACKGROUND=0
+  # Don't show Node version next to the environment name.
+  typeset -g POWERLEVEL9K_NODEENV_SHOW_NODE_VERSION=false
+  # Separate environment name from Node version only with a space.
+  typeset -g POWERLEVEL9K_NODEENV_{LEFT,RIGHT}_DELIMITER=
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_NODEENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ##############################[ node_version: node.js version ]###############################
+  # Node version color.
+  typeset -g POWERLEVEL9K_NODE_VERSION_FOREGROUND=7
+  typeset -g POWERLEVEL9K_NODE_VERSION_BACKGROUND=2
+  # Show node version only when in a directory tree containing package.json.
+  typeset -g POWERLEVEL9K_NODE_VERSION_PROJECT_ONLY=true
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_NODE_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  #######################[ go_version: go version (https://golang.org) ]########################
+  # Go version color.
+  typeset -g POWERLEVEL9K_GO_VERSION_FOREGROUND=255
+  typeset -g POWERLEVEL9K_GO_VERSION_BACKGROUND=2
+  # Show go version only when in a go project subdirectory.
+  typeset -g POWERLEVEL9K_GO_VERSION_PROJECT_ONLY=true
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_GO_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  #################[ rust_version: rustc version (https://www.rust-lang.org) ]##################
+  # Rust version color.
+  typeset -g POWERLEVEL9K_RUST_VERSION_FOREGROUND=0
+  typeset -g POWERLEVEL9K_RUST_VERSION_BACKGROUND=208
+  # Show rust version only when in a rust project subdirectory.
+  typeset -g POWERLEVEL9K_RUST_VERSION_PROJECT_ONLY=true
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_RUST_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ###############[ dotnet_version: .NET version (https://dotnet.microsoft.com) ]################
+  # .NET version color.
+  typeset -g POWERLEVEL9K_DOTNET_VERSION_FOREGROUND=7
+  typeset -g POWERLEVEL9K_DOTNET_VERSION_BACKGROUND=5
+  # Show .NET version only when in a .NET project subdirectory.
+  typeset -g POWERLEVEL9K_DOTNET_VERSION_PROJECT_ONLY=true
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_DOTNET_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  #####################[ php_version: php version (https://www.php.net/) ]######################
+  # PHP version color.
+  typeset -g POWERLEVEL9K_PHP_VERSION_FOREGROUND=0
+  typeset -g POWERLEVEL9K_PHP_VERSION_BACKGROUND=5
+  # Show PHP version only when in a PHP project subdirectory.
+  typeset -g POWERLEVEL9K_PHP_VERSION_PROJECT_ONLY=true
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_PHP_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ##########[ laravel_version: laravel php framework version (https://laravel.com/) ]###########
+  # Laravel version color.
+  typeset -g POWERLEVEL9K_LARAVEL_VERSION_FOREGROUND=1
+  typeset -g POWERLEVEL9K_LARAVEL_VERSION_BACKGROUND=7
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_LARAVEL_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  #############[ rbenv: ruby version from rbenv (https://github.com/rbenv/rbenv) ]##############
+  # Rbenv color.
+  typeset -g POWERLEVEL9K_RBENV_FOREGROUND=0
+  typeset -g POWERLEVEL9K_RBENV_BACKGROUND=1
+  # Hide ruby version if it doesn't come from one of these sources.
+  typeset -g POWERLEVEL9K_RBENV_SOURCES=(shell local global)
+  # If set to false, hide ruby version if it's the same as global:
+  # $(rbenv version-name) == $(rbenv global).
+  typeset -g POWERLEVEL9K_RBENV_PROMPT_ALWAYS_SHOW=false
+  # If set to false, hide ruby version if it's equal to "system".
+  typeset -g POWERLEVEL9K_RBENV_SHOW_SYSTEM=true
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_RBENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ####################[ java_version: java version (https://www.java.com/) ]####################
+  # Java version color.
+  typeset -g POWERLEVEL9K_JAVA_VERSION_FOREGROUND=1
+  typeset -g POWERLEVEL9K_JAVA_VERSION_BACKGROUND=7
+  # Show java version only when in a java project subdirectory.
+  typeset -g POWERLEVEL9K_JAVA_VERSION_PROJECT_ONLY=true
+  # Show brief version.
+  typeset -g POWERLEVEL9K_JAVA_VERSION_FULL=false
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_JAVA_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ###[ package: name@version from package.json (https://docs.npmjs.com/files/package.json) ]####
+  # Package color.
+  typeset -g POWERLEVEL9K_PACKAGE_FOREGROUND=0
+  typeset -g POWERLEVEL9K_PACKAGE_BACKGROUND=6
+
+  # Package format. The following parameters are available within the expansion.
+  #
+  # - P9K_PACKAGE_NAME     The value of `name` field in package.json.
+  # - P9K_PACKAGE_VERSION  The value of `version` field in package.json.
+  #
+  # typeset -g POWERLEVEL9K_PACKAGE_CONTENT_EXPANSION='${P9K_PACKAGE_NAME//\%/%%}@${P9K_PACKAGE_VERSION//\%/%%}'
+
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_PACKAGE_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  #######################[ rvm: ruby version from rvm (https://rvm.io) ]########################
+  # Rvm color.
+  typeset -g POWERLEVEL9K_RVM_FOREGROUND=0
+  typeset -g POWERLEVEL9K_RVM_BACKGROUND=240
+  # Don't show @gemset at the end.
+  typeset -g POWERLEVEL9K_RVM_SHOW_GEMSET=false
+  # Don't show ruby- at the front.
+  typeset -g POWERLEVEL9K_RVM_SHOW_PREFIX=false
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_RVM_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ###########[ fvm: flutter version management (https://github.com/leoafarias/fvm) ]############
+  # Fvm color.
+  typeset -g POWERLEVEL9K_FVM_FOREGROUND=0
+  typeset -g POWERLEVEL9K_FVM_BACKGROUND=4
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_FVM_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ##########[ luaenv: lua version from luaenv (https://github.com/cehoffman/luaenv) ]###########
+  # Lua color.
+  typeset -g POWERLEVEL9K_LUAENV_FOREGROUND=0
+  typeset -g POWERLEVEL9K_LUAENV_BACKGROUND=4
+  # Hide lua version if it doesn't come from one of these sources.
+  typeset -g POWERLEVEL9K_LUAENV_SOURCES=(shell local global)
+  # If set to false, hide lua version if it's the same as global:
+  # $(luaenv version-name) == $(luaenv global).
+  typeset -g POWERLEVEL9K_LUAENV_PROMPT_ALWAYS_SHOW=false
+  # If set to false, hide lua version if it's equal to "system".
+  typeset -g POWERLEVEL9K_LUAENV_SHOW_SYSTEM=true
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_LUAENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ###############[ jenv: java version from jenv (https://github.com/jenv/jenv) ]################
+  # Java color.
+  typeset -g POWERLEVEL9K_JENV_FOREGROUND=1
+  typeset -g POWERLEVEL9K_JENV_BACKGROUND=7
+  # Hide java version if it doesn't come from one of these sources.
+  typeset -g POWERLEVEL9K_JENV_SOURCES=(shell local global)
+  # If set to false, hide java version if it's the same as global:
+  # $(jenv version-name) == $(jenv global).
+  typeset -g POWERLEVEL9K_JENV_PROMPT_ALWAYS_SHOW=false
+  # If set to false, hide java version if it's equal to "system".
+  typeset -g POWERLEVEL9K_JENV_SHOW_SYSTEM=true
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_JENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ###########[ plenv: perl version from plenv (https://github.com/tokuhirom/plenv) ]############
+  # Perl color.
+  typeset -g POWERLEVEL9K_PLENV_FOREGROUND=0
+  typeset -g POWERLEVEL9K_PLENV_BACKGROUND=4
+  # Hide perl version if it doesn't come from one of these sources.
+  typeset -g POWERLEVEL9K_PLENV_SOURCES=(shell local global)
+  # If set to false, hide perl version if it's the same as global:
+  # $(plenv version-name) == $(plenv global).
+  typeset -g POWERLEVEL9K_PLENV_PROMPT_ALWAYS_SHOW=false
+  # If set to false, hide perl version if it's equal to "system".
+  typeset -g POWERLEVEL9K_PLENV_SHOW_SYSTEM=true
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_PLENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ###########[ perlbrew: perl version from perlbrew (https://github.com/gugod/App-perlbrew) ]############
+  # Perlbrew color.
+  typeset -g POWERLEVEL9K_PERLBREW_FOREGROUND=67
+  # Show perlbrew version only when in a perl project subdirectory.
+  typeset -g POWERLEVEL9K_PERLBREW_PROJECT_ONLY=true
+  # Don't show "perl-" at the front.
+  typeset -g POWERLEVEL9K_PERLBREW_SHOW_PREFIX=false
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_PERLBREW_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ############[ phpenv: php version from phpenv (https://github.com/phpenv/phpenv) ]############
+  # PHP color.
+  typeset -g POWERLEVEL9K_PHPENV_FOREGROUND=0
+  typeset -g POWERLEVEL9K_PHPENV_BACKGROUND=5
+  # Hide php version if it doesn't come from one of these sources.
+  typeset -g POWERLEVEL9K_PHPENV_SOURCES=(shell local global)
+  # If set to false, hide php version if it's the same as global:
+  # $(phpenv version-name) == $(phpenv global).
+  typeset -g POWERLEVEL9K_PHPENV_PROMPT_ALWAYS_SHOW=false
+  # If set to false, hide PHP version if it's equal to "system".
+  typeset -g POWERLEVEL9K_PHPENV_SHOW_SYSTEM=true
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_PHPENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  #######[ scalaenv: scala version from scalaenv (https://github.com/scalaenv/scalaenv) ]#######
+  # Scala color.
+  typeset -g POWERLEVEL9K_SCALAENV_FOREGROUND=0
+  typeset -g POWERLEVEL9K_SCALAENV_BACKGROUND=1
+  # Hide scala version if it doesn't come from one of these sources.
+  typeset -g POWERLEVEL9K_SCALAENV_SOURCES=(shell local global)
+  # If set to false, hide scala version if it's the same as global:
+  # $(scalaenv version-name) == $(scalaenv global).
+  typeset -g POWERLEVEL9K_SCALAENV_PROMPT_ALWAYS_SHOW=false
+  # If set to false, hide scala version if it's equal to "system".
+  typeset -g POWERLEVEL9K_SCALAENV_SHOW_SYSTEM=true
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_SCALAENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ##########[ haskell_stack: haskell version from stack (https://haskellstack.org/) ]###########
+  # Haskell color.
+  typeset -g POWERLEVEL9K_HASKELL_STACK_FOREGROUND=0
+  typeset -g POWERLEVEL9K_HASKELL_STACK_BACKGROUND=3
+
+  # Hide haskell version if it doesn't come from one of these sources.
+  #
+  #   shell:  version is set by STACK_YAML
+  #   local:  version is set by stack.yaml up the directory tree
+  #   global: version is set by the implicit global project (~/.stack/global-project/stack.yaml)
+  typeset -g POWERLEVEL9K_HASKELL_STACK_SOURCES=(shell local)
+  # If set to false, hide haskell version if it's the same as in the implicit global project.
+  typeset -g POWERLEVEL9K_HASKELL_STACK_ALWAYS_SHOW=true
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_HASKELL_STACK_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ################[ terraform: terraform workspace (https://www.terraform.io) ]#################
+  # Don't show terraform workspace if it's literally "default".
+  typeset -g POWERLEVEL9K_TERRAFORM_SHOW_DEFAULT=false
+  # POWERLEVEL9K_TERRAFORM_CLASSES is an array with even number of elements. The first element
+  # in each pair defines a pattern against which the current terraform workspace gets matched.
+  # More specifically, it's P9K_CONTENT prior to the application of context expansion (see below)
+  # that gets matched. If you unset all POWERLEVEL9K_TERRAFORM_*CONTENT_EXPANSION parameters,
+  # you'll see this value in your prompt. The second element of each pair in
+  # POWERLEVEL9K_TERRAFORM_CLASSES defines the workspace class. Patterns are tried in order. The
+  # first match wins.
+  #
+  # For example, given these settings:
+  #
+  #   typeset -g POWERLEVEL9K_TERRAFORM_CLASSES=(
+  #     '*prod*'  PROD
+  #     '*test*'  TEST
+  #     '*'       OTHER)
+  #
+  # If your current terraform workspace is "project_test", its class is TEST because "project_test"
+  # doesn't match the pattern '*prod*' but does match '*test*'.
+  #
+  # You can define different colors, icons and content expansions for different classes:
+  #
+  #   typeset -g POWERLEVEL9K_TERRAFORM_TEST_FOREGROUND=2
+  #   typeset -g POWERLEVEL9K_TERRAFORM_TEST_BACKGROUND=0
+  #   typeset -g POWERLEVEL9K_TERRAFORM_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  #   typeset -g POWERLEVEL9K_TERRAFORM_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <'
+  typeset -g POWERLEVEL9K_TERRAFORM_CLASSES=(
+      # '*prod*'  PROD    # These values are examples that are unlikely
+      # '*test*'  TEST    # to match your needs. Customize them as needed.
+      '*'         OTHER)
+  typeset -g POWERLEVEL9K_TERRAFORM_OTHER_FOREGROUND=4
+  typeset -g POWERLEVEL9K_TERRAFORM_OTHER_BACKGROUND=0
+  # typeset -g POWERLEVEL9K_TERRAFORM_OTHER_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  #############[ terraform_version: terraform version (https://www.terraform.io) ]##############
+  # Terraform version color.
+  typeset -g POWERLEVEL9K_TERRAFORM_VERSION_FOREGROUND=4
+  typeset -g POWERLEVEL9K_TERRAFORM_VERSION_BACKGROUND=0
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_TERRAFORM_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ################[ terraform_version: It shows active terraform version (https://www.terraform.io) ]#################
+  typeset -g POWERLEVEL9K_TERRAFORM_VERSION_SHOW_ON_COMMAND='terraform|tf'
+
+  #############[ kubecontext: current kubernetes context (https://kubernetes.io/) ]#############
+  # Show kubecontext only when the command you are typing invokes one of these tools.
+  # Tip: Remove the next line to always show kubecontext.
+  typeset -g POWERLEVEL9K_KUBECONTEXT_SHOW_ON_COMMAND='kubectl|helm|kubens|kubectx|oc|istioctl|kogito|k9s|helmfile|flux|fluxctl|stern|kubeseal|skaffold|kubent|kubecolor|cmctl|sparkctl'
+
+  # Kubernetes context classes for the purpose of using different colors, icons and expansions with
+  # different contexts.
+  #
+  # POWERLEVEL9K_KUBECONTEXT_CLASSES is an array with even number of elements. The first element
+  # in each pair defines a pattern against which the current kubernetes context gets matched.
+  # More specifically, it's P9K_CONTENT prior to the application of context expansion (see below)
+  # that gets matched. If you unset all POWERLEVEL9K_KUBECONTEXT_*CONTENT_EXPANSION parameters,
+  # you'll see this value in your prompt. The second element of each pair in
+  # POWERLEVEL9K_KUBECONTEXT_CLASSES defines the context class. Patterns are tried in order. The
+  # first match wins.
+  #
+  # For example, given these settings:
+  #
+  #   typeset -g POWERLEVEL9K_KUBECONTEXT_CLASSES=(
+  #     '*prod*'  PROD
+  #     '*test*'  TEST
+  #     '*'       DEFAULT)
+  #
+  # If your current kubernetes context is "deathray-testing/default", its class is TEST
+  # because "deathray-testing/default" doesn't match the pattern '*prod*' but does match '*test*'.
+  #
+  # You can define different colors, icons and content expansions for different classes:
+  #
+  #   typeset -g POWERLEVEL9K_KUBECONTEXT_TEST_FOREGROUND=0
+  #   typeset -g POWERLEVEL9K_KUBECONTEXT_TEST_BACKGROUND=2
+  #   typeset -g POWERLEVEL9K_KUBECONTEXT_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  #   typeset -g POWERLEVEL9K_KUBECONTEXT_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <'
+  typeset -g POWERLEVEL9K_KUBECONTEXT_CLASSES=(
+      # '*prod*'  PROD    # These values are examples that are unlikely
+      # '*test*'  TEST    # to match your needs. Customize them as needed.
+      '*'       DEFAULT)
+  typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_FOREGROUND=7
+  typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_BACKGROUND=5
+  # typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  # Use POWERLEVEL9K_KUBECONTEXT_CONTENT_EXPANSION to specify the content displayed by kubecontext
+  # segment. Parameter expansions are very flexible and fast, too. See reference:
+  # http://zsh.sourceforge.net/Doc/Release/Expansion.html#Parameter-Expansion.
+  #
+  # Within the expansion the following parameters are always available:
+  #
+  # - P9K_CONTENT                The content that would've been displayed if there was no content
+  #                              expansion defined.
+  # - P9K_KUBECONTEXT_NAME       The current context's name. Corresponds to column NAME in the
+  #                              output of `kubectl config get-contexts`.
+  # - P9K_KUBECONTEXT_CLUSTER    The current context's cluster. Corresponds to column CLUSTER in the
+  #                              output of `kubectl config get-contexts`.
+  # - P9K_KUBECONTEXT_NAMESPACE  The current context's namespace. Corresponds to column NAMESPACE
+  #                              in the output of `kubectl config get-contexts`. If there is no
+  #                              namespace, the parameter is set to "default".
+  # - P9K_KUBECONTEXT_USER       The current context's user. Corresponds to column AUTHINFO in the
+  #                              output of `kubectl config get-contexts`.
+  #
+  # If the context points to Google Kubernetes Engine (GKE) or Elastic Kubernetes Service (EKS),
+  # the following extra parameters are available:
+  #
+  # - P9K_KUBECONTEXT_CLOUD_NAME     Either "gke" or "eks".
+  # - P9K_KUBECONTEXT_CLOUD_ACCOUNT  Account/project ID.
+  # - P9K_KUBECONTEXT_CLOUD_ZONE     Availability zone.
+  # - P9K_KUBECONTEXT_CLOUD_CLUSTER  Cluster.
+  #
+  # P9K_KUBECONTEXT_CLOUD_* parameters are derived from P9K_KUBECONTEXT_CLUSTER. For example,
+  # if P9K_KUBECONTEXT_CLUSTER is "gke_my-account_us-east1-a_my-cluster-01":
+  #
+  #   - P9K_KUBECONTEXT_CLOUD_NAME=gke
+  #   - P9K_KUBECONTEXT_CLOUD_ACCOUNT=my-account
+  #   - P9K_KUBECONTEXT_CLOUD_ZONE=us-east1-a
+  #   - P9K_KUBECONTEXT_CLOUD_CLUSTER=my-cluster-01
+  #
+  # If P9K_KUBECONTEXT_CLUSTER is "arn:aws:eks:us-east-1:123456789012:cluster/my-cluster-01":
+  #
+  #   - P9K_KUBECONTEXT_CLOUD_NAME=eks
+  #   - P9K_KUBECONTEXT_CLOUD_ACCOUNT=123456789012
+  #   - P9K_KUBECONTEXT_CLOUD_ZONE=us-east-1
+  #   - P9K_KUBECONTEXT_CLOUD_CLUSTER=my-cluster-01
+  typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_CONTENT_EXPANSION=
+  # Show P9K_KUBECONTEXT_CLOUD_CLUSTER if it's not empty and fall back to P9K_KUBECONTEXT_NAME.
+  POWERLEVEL9K_KUBECONTEXT_DEFAULT_CONTENT_EXPANSION+='${P9K_KUBECONTEXT_CLOUD_CLUSTER:-${P9K_KUBECONTEXT_NAME}}'
+  # Append the current context's namespace if it's not "default".
+  POWERLEVEL9K_KUBECONTEXT_DEFAULT_CONTENT_EXPANSION+='${${:-/$P9K_KUBECONTEXT_NAMESPACE}:#/default}'
+
+  # Custom prefix.
+  # typeset -g POWERLEVEL9K_KUBECONTEXT_PREFIX='at '
+
+  #[ aws: aws profile (https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html) ]#
+  # Show aws only when the command you are typing invokes one of these tools.
+  # Tip: Remove the next line to always show aws.
+  typeset -g POWERLEVEL9K_AWS_SHOW_ON_COMMAND='aws|awless|cdk|terraform|pulumi|terragrunt'
+
+  # POWERLEVEL9K_AWS_CLASSES is an array with even number of elements. The first element
+  # in each pair defines a pattern against which the current AWS profile gets matched.
+  # More specifically, it's P9K_CONTENT prior to the application of context expansion (see below)
+  # that gets matched. If you unset all POWERLEVEL9K_AWS_*CONTENT_EXPANSION parameters,
+  # you'll see this value in your prompt. The second element of each pair in
+  # POWERLEVEL9K_AWS_CLASSES defines the profile class. Patterns are tried in order. The
+  # first match wins.
+  #
+  # For example, given these settings:
+  #
+  #   typeset -g POWERLEVEL9K_AWS_CLASSES=(
+  #     '*prod*'  PROD
+  #     '*test*'  TEST
+  #     '*'       DEFAULT)
+  #
+  # If your current AWS profile is "company_test", its class is TEST
+  # because "company_test" doesn't match the pattern '*prod*' but does match '*test*'.
+  #
+  # You can define different colors, icons and content expansions for different classes:
+  #
+  #   typeset -g POWERLEVEL9K_AWS_TEST_FOREGROUND=28
+  #   typeset -g POWERLEVEL9K_AWS_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  #   typeset -g POWERLEVEL9K_AWS_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <'
+  typeset -g POWERLEVEL9K_AWS_CLASSES=(
+      # '*prod*'  PROD    # These values are examples that are unlikely
+      # '*test*'  TEST    # to match your needs. Customize them as needed.
+      '*'       DEFAULT)
+  typeset -g POWERLEVEL9K_AWS_DEFAULT_FOREGROUND=7
+  typeset -g POWERLEVEL9K_AWS_DEFAULT_BACKGROUND=1
+  # typeset -g POWERLEVEL9K_AWS_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  # AWS segment format. The following parameters are available within the expansion.
+  #
+  # - P9K_AWS_PROFILE  The name of the current AWS profile.
+  # - P9K_AWS_REGION   The region associated with the current AWS profile.
+  typeset -g POWERLEVEL9K_AWS_CONTENT_EXPANSION='${P9K_AWS_PROFILE//\%/%%}${P9K_AWS_REGION:+ ${P9K_AWS_REGION//\%/%%}}'
+
+  #[ aws_eb_env: aws elastic beanstalk environment (https://aws.amazon.com/elasticbeanstalk/) ]#
+  # AWS Elastic Beanstalk environment color.
+  typeset -g POWERLEVEL9K_AWS_EB_ENV_FOREGROUND=2
+  typeset -g POWERLEVEL9K_AWS_EB_ENV_BACKGROUND=0
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_AWS_EB_ENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ##########[ azure: azure account name (https://docs.microsoft.com/en-us/cli/azure) ]##########
+  # Show azure only when the command you are typing invokes one of these tools.
+  # Tip: Remove the next line to always show azure.
+  typeset -g POWERLEVEL9K_AZURE_SHOW_ON_COMMAND='az|terraform|pulumi|terragrunt'
+
+  # POWERLEVEL9K_AZURE_CLASSES is an array with even number of elements. The first element
+  # in each pair defines a pattern against which the current azure account name gets matched.
+  # More specifically, it's P9K_CONTENT prior to the application of context expansion (see below)
+  # that gets matched. If you unset all POWERLEVEL9K_AZURE_*CONTENT_EXPANSION parameters,
+  # you'll see this value in your prompt. The second element of each pair in
+  # POWERLEVEL9K_AZURE_CLASSES defines the account class. Patterns are tried in order. The
+  # first match wins.
+  #
+  # For example, given these settings:
+  #
+  #   typeset -g POWERLEVEL9K_AZURE_CLASSES=(
+  #     '*prod*'  PROD
+  #     '*test*'  TEST
+  #     '*'       OTHER)
+  #
+  # If your current azure account is "company_test", its class is TEST because "company_test"
+  # doesn't match the pattern '*prod*' but does match '*test*'.
+  #
+  # You can define different colors, icons and content expansions for different classes:
+  #
+  #   typeset -g POWERLEVEL9K_AZURE_TEST_FOREGROUND=2
+  #   typeset -g POWERLEVEL9K_AZURE_TEST_BACKGROUND=0
+  #   typeset -g POWERLEVEL9K_AZURE_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  #   typeset -g POWERLEVEL9K_AZURE_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <'
+  typeset -g POWERLEVEL9K_AZURE_CLASSES=(
+      # '*prod*'  PROD    # These values are examples that are unlikely
+      # '*test*'  TEST    # to match your needs. Customize them as needed.
+      '*'         OTHER)
+
+  # Azure account name color.
+  typeset -g POWERLEVEL9K_AZURE_OTHER_FOREGROUND=7
+  typeset -g POWERLEVEL9K_AZURE_OTHER_BACKGROUND=4
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_AZURE_OTHER_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ##########[ gcloud: google cloud account and project (https://cloud.google.com/) ]###########
+  # Show gcloud only when the command you are typing invokes one of these tools.
+  # Tip: Remove the next line to always show gcloud.
+  typeset -g POWERLEVEL9K_GCLOUD_SHOW_ON_COMMAND='gcloud|gcs|gsutil'
+  # Google cloud color.
+  typeset -g POWERLEVEL9K_GCLOUD_FOREGROUND=7
+  typeset -g POWERLEVEL9K_GCLOUD_BACKGROUND=4
+
+  # Google cloud format. Change the value of POWERLEVEL9K_GCLOUD_PARTIAL_CONTENT_EXPANSION and/or
+  # POWERLEVEL9K_GCLOUD_COMPLETE_CONTENT_EXPANSION if the default is too verbose or not informative
+  # enough. You can use the following parameters in the expansions. Each of them corresponds to the
+  # output of `gcloud` tool.
+  #
+  #   Parameter                | Source
+  #   -------------------------|--------------------------------------------------------------------
+  #   P9K_GCLOUD_CONFIGURATION | gcloud config configurations list --format='value(name)'
+  #   P9K_GCLOUD_ACCOUNT       | gcloud config get-value account
+  #   P9K_GCLOUD_PROJECT_ID    | gcloud config get-value project
+  #   P9K_GCLOUD_PROJECT_NAME  | gcloud projects describe $P9K_GCLOUD_PROJECT_ID --format='value(name)'
+  #
+  # Note: ${VARIABLE//\%/%%} expands to ${VARIABLE} with all occurrences of '%' replaced with '%%'.
+  #
+  # Obtaining project name requires sending a request to Google servers. This can take a long time
+  # and even fail. When project name is unknown, P9K_GCLOUD_PROJECT_NAME is not set and gcloud
+  # prompt segment is in state PARTIAL. When project name gets known, P9K_GCLOUD_PROJECT_NAME gets
+  # set and gcloud prompt segment transitions to state COMPLETE.
+  #
+  # You can customize the format, icon and colors of gcloud segment separately for states PARTIAL
+  # and COMPLETE. You can also hide gcloud in state PARTIAL by setting
+  # POWERLEVEL9K_GCLOUD_PARTIAL_VISUAL_IDENTIFIER_EXPANSION and
+  # POWERLEVEL9K_GCLOUD_PARTIAL_CONTENT_EXPANSION to empty.
+  typeset -g POWERLEVEL9K_GCLOUD_PARTIAL_CONTENT_EXPANSION='${P9K_GCLOUD_PROJECT_ID//\%/%%}'
+  typeset -g POWERLEVEL9K_GCLOUD_COMPLETE_CONTENT_EXPANSION='${P9K_GCLOUD_PROJECT_NAME//\%/%%}'
+
+  # Send a request to Google (by means of `gcloud projects describe ...`) to obtain project name
+  # this often. Negative value disables periodic polling. In this mode project name is retrieved
+  # only when the current configuration, account or project id changes.
+  typeset -g POWERLEVEL9K_GCLOUD_REFRESH_PROJECT_NAME_SECONDS=60
+
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_GCLOUD_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  #[ google_app_cred: google application credentials (https://cloud.google.com/docs/authentication/production) ]#
+  # Show google_app_cred only when the command you are typing invokes one of these tools.
+  # Tip: Remove the next line to always show google_app_cred.
+  typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_SHOW_ON_COMMAND='terraform|pulumi|terragrunt'
+
+  # Google application credentials classes for the purpose of using different colors, icons and
+  # expansions with different credentials.
+  #
+  # POWERLEVEL9K_GOOGLE_APP_CRED_CLASSES is an array with even number of elements. The first
+  # element in each pair defines a pattern against which the current kubernetes context gets
+  # matched. More specifically, it's P9K_CONTENT prior to the application of context expansion
+  # (see below) that gets matched. If you unset all POWERLEVEL9K_GOOGLE_APP_CRED_*CONTENT_EXPANSION
+  # parameters, you'll see this value in your prompt. The second element of each pair in
+  # POWERLEVEL9K_GOOGLE_APP_CRED_CLASSES defines the context class. Patterns are tried in order.
+  # The first match wins.
+  #
+  # For example, given these settings:
+  #
+  #   typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_CLASSES=(
+  #     '*:*prod*:*'  PROD
+  #     '*:*test*:*'  TEST
+  #     '*'           DEFAULT)
+  #
+  # If your current Google application credentials is "service_account deathray-testing x@y.com",
+  # its class is TEST because it doesn't match the pattern '* *prod* *' but does match '* *test* *'.
+  #
+  # You can define different colors, icons and content expansions for different classes:
+  #
+  #   typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_TEST_FOREGROUND=28
+  #   typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  #   typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_TEST_CONTENT_EXPANSION='$P9K_GOOGLE_APP_CRED_PROJECT_ID'
+  typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_CLASSES=(
+      # '*:*prod*:*'  PROD    # These values are examples that are unlikely
+      # '*:*test*:*'  TEST    # to match your needs. Customize them as needed.
+      '*'             DEFAULT)
+  typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_DEFAULT_FOREGROUND=7
+  typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_DEFAULT_BACKGROUND=4
+  # typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  # Use POWERLEVEL9K_GOOGLE_APP_CRED_CONTENT_EXPANSION to specify the content displayed by
+  # google_app_cred segment. Parameter expansions are very flexible and fast, too. See reference:
+  # http://zsh.sourceforge.net/Doc/Release/Expansion.html#Parameter-Expansion.
+  #
+  # You can use the following parameters in the expansion. Each of them corresponds to one of the
+  # fields in the JSON file pointed to by GOOGLE_APPLICATION_CREDENTIALS.
+  #
+  #   Parameter                        | JSON key file field
+  #   ---------------------------------+---------------
+  #   P9K_GOOGLE_APP_CRED_TYPE         | type
+  #   P9K_GOOGLE_APP_CRED_PROJECT_ID   | project_id
+  #   P9K_GOOGLE_APP_CRED_CLIENT_EMAIL | client_email
+  #
+  # Note: ${VARIABLE//\%/%%} expands to ${VARIABLE} with all occurrences of '%' replaced by '%%'.
+  typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_DEFAULT_CONTENT_EXPANSION='${P9K_GOOGLE_APP_CRED_PROJECT_ID//\%/%%}'
+
+  ##############[ toolbox: toolbox name (https://github.com/containers/toolbox) ]###############
+  # Toolbox color.
+  typeset -g POWERLEVEL9K_TOOLBOX_FOREGROUND=0
+  typeset -g POWERLEVEL9K_TOOLBOX_BACKGROUND=3
+  # Don't display the name of the toolbox if it matches fedora-toolbox-*.
+  typeset -g POWERLEVEL9K_TOOLBOX_CONTENT_EXPANSION='${P9K_TOOLBOX_NAME:#fedora-toolbox-*}'
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_TOOLBOX_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # Custom prefix.
+  # typeset -g POWERLEVEL9K_TOOLBOX_PREFIX='in '
+
+  ###############################[ public_ip: public IP address ]###############################
+  # Public IP color.
+  typeset -g POWERLEVEL9K_PUBLIC_IP_FOREGROUND=7
+  typeset -g POWERLEVEL9K_PUBLIC_IP_BACKGROUND=0
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_PUBLIC_IP_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ########################[ vpn_ip: virtual private network indicator ]#########################
+  # VPN IP color.
+  typeset -g POWERLEVEL9K_VPN_IP_FOREGROUND=0
+  typeset -g POWERLEVEL9K_VPN_IP_BACKGROUND=6
+  # When on VPN, show just an icon without the IP address.
+  # Tip: To display the private IP address when on VPN, remove the next line.
+  typeset -g POWERLEVEL9K_VPN_IP_CONTENT_EXPANSION=
+  # Regular expression for the VPN network interface. Run `ifconfig` or `ip -4 a show` while on VPN
+  # to see the name of the interface.
+  typeset -g POWERLEVEL9K_VPN_IP_INTERFACE='(gpd|wg|(.*tun)|tailscale)[0-9]*|(zt.*)'
+  # If set to true, show one segment per matching network interface. If set to false, show only
+  # one segment corresponding to the first matching network interface.
+  # Tip: If you set it to true, you'll probably want to unset POWERLEVEL9K_VPN_IP_CONTENT_EXPANSION.
+  typeset -g POWERLEVEL9K_VPN_IP_SHOW_ALL=false
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_VPN_IP_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ###########[ ip: ip address and bandwidth usage for a specified network interface ]###########
+  # IP color.
+  typeset -g POWERLEVEL9K_IP_BACKGROUND=4
+  typeset -g POWERLEVEL9K_IP_FOREGROUND=0
+  # The following parameters are accessible within the expansion:
+  #
+  #   Parameter             | Meaning
+  #   ----------------------+-------------------------------------------
+  #   P9K_IP_IP             | IP address
+  #   P9K_IP_INTERFACE      | network interface
+  #   P9K_IP_RX_BYTES       | total number of bytes received
+  #   P9K_IP_TX_BYTES       | total number of bytes sent
+  #   P9K_IP_RX_BYTES_DELTA | number of bytes received since last prompt
+  #   P9K_IP_TX_BYTES_DELTA | number of bytes sent since last prompt
+  #   P9K_IP_RX_RATE        | receive rate (since last prompt)
+  #   P9K_IP_TX_RATE        | send rate (since last prompt)
+  typeset -g POWERLEVEL9K_IP_CONTENT_EXPANSION='${P9K_IP_RX_RATE:+⇣$P9K_IP_RX_RATE }${P9K_IP_TX_RATE:+⇡$P9K_IP_TX_RATE }$P9K_IP_IP'
+  # Show information for the first network interface whose name matches this regular expression.
+  # Run `ifconfig` or `ip -4 a show` to see the names of all network interfaces.
+  typeset -g POWERLEVEL9K_IP_INTERFACE='[ew].*'
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_IP_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  #########################[ proxy: system-wide http/https/ftp proxy ]##########################
+  # Proxy color.
+  typeset -g POWERLEVEL9K_PROXY_FOREGROUND=4
+  typeset -g POWERLEVEL9K_PROXY_BACKGROUND=0
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_PROXY_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ################################[ battery: internal battery ]#################################
+  # Show battery in red when it's below this level and not connected to power supply.
+  typeset -g POWERLEVEL9K_BATTERY_LOW_THRESHOLD=20
+  typeset -g POWERLEVEL9K_BATTERY_LOW_FOREGROUND=1
+  # Show battery in green when it's charging or fully charged.
+  typeset -g POWERLEVEL9K_BATTERY_{CHARGING,CHARGED}_FOREGROUND=2
+  # Show battery in yellow when it's discharging.
+  typeset -g POWERLEVEL9K_BATTERY_DISCONNECTED_FOREGROUND=3
+  # Battery pictograms going from low to high level of charge.
+  typeset -g POWERLEVEL9K_BATTERY_STAGES='\UF008E\UF007A\UF007B\UF007C\UF007D\UF007E\UF007F\UF0080\UF0081\UF0082\UF0079'
+  # Don't show the remaining time to charge/discharge.
+  typeset -g POWERLEVEL9K_BATTERY_VERBOSE=false
+  typeset -g POWERLEVEL9K_BATTERY_BACKGROUND=0
+
+  #####################################[ wifi: wifi speed ]#####################################
+  # WiFi color.
+  typeset -g POWERLEVEL9K_WIFI_FOREGROUND=0
+  typeset -g POWERLEVEL9K_WIFI_BACKGROUND=4
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_WIFI_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  # Use different colors and icons depending on signal strength ($P9K_WIFI_BARS).
+  #
+  #   # Wifi colors and icons for different signal strength levels (low to high).
+  #   typeset -g my_wifi_fg=(0 0 0 0 0)                                # <-- change these values
+  #   typeset -g my_wifi_icon=('WiFi' 'WiFi' 'WiFi' 'WiFi' 'WiFi')     # <-- change these values
+  #
+  #   typeset -g POWERLEVEL9K_WIFI_CONTENT_EXPANSION='%F{${my_wifi_fg[P9K_WIFI_BARS+1]}}$P9K_WIFI_LAST_TX_RATE Mbps'
+  #   typeset -g POWERLEVEL9K_WIFI_VISUAL_IDENTIFIER_EXPANSION='%F{${my_wifi_fg[P9K_WIFI_BARS+1]}}${my_wifi_icon[P9K_WIFI_BARS+1]}'
+  #
+  # The following parameters are accessible within the expansions:
+  #
+  #   Parameter             | Meaning
+  #   ----------------------+---------------
+  #   P9K_WIFI_SSID         | service set identifier, a.k.a. network name
+  #   P9K_WIFI_LINK_AUTH    | authentication protocol such as "wpa2-psk" or "none"; empty if unknown
+  #   P9K_WIFI_LAST_TX_RATE | wireless transmit rate in megabits per second
+  #   P9K_WIFI_RSSI         | signal strength in dBm, from -120 to 0
+  #   P9K_WIFI_NOISE        | noise in dBm, from -120 to 0
+  #   P9K_WIFI_BARS         | signal strength in bars, from 0 to 4 (derived from P9K_WIFI_RSSI and P9K_WIFI_NOISE)
+
+  ####################################[ time: current time ]####################################
+  # Current time color.
+  typeset -g POWERLEVEL9K_TIME_FOREGROUND=0
+  typeset -g POWERLEVEL9K_TIME_BACKGROUND=7
+  # Format for the current time: 09:51:02. See `man 3 strftime`.
+  typeset -g POWERLEVEL9K_TIME_FORMAT='%D{%H:%M:%S}'
+  # If set to true, time will update when you hit enter. This way prompts for the past
+  # commands will contain the start times of their commands as opposed to the default
+  # behavior where they contain the end times of their preceding commands.
+  typeset -g POWERLEVEL9K_TIME_UPDATE_ON_COMMAND=false
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_TIME_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # Custom prefix.
+  # typeset -g POWERLEVEL9K_TIME_PREFIX='at '
+
+  # Example of a user-defined prompt segment. Function prompt_example will be called on every
+  # prompt if `example` prompt segment is added to POWERLEVEL9K_LEFT_PROMPT_ELEMENTS or
+  # POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS. It displays an icon and yellow text on red background
+  # greeting the user.
+  #
+  # Type `p10k help segment` for documentation and a more sophisticated example.
+  function prompt_example() {
+    p10k segment -b 1 -f 3 -i '⭐' -t 'hello, %n'
+  }
+
+  # User-defined prompt segments may optionally provide an instant_prompt_* function. Its job
+  # is to generate the prompt segment for display in instant prompt. See
+  # https://github.com/romkatv/powerlevel10k#instant-prompt.
+  #
+  # Powerlevel10k will call instant_prompt_* at the same time as the regular prompt_* function
+  # and will record all `p10k segment` calls it makes. When displaying instant prompt, Powerlevel10k
+  # will replay these calls without actually calling instant_prompt_*. It is imperative that
+  # instant_prompt_* always makes the same `p10k segment` calls regardless of environment. If this
+  # rule is not observed, the content of instant prompt will be incorrect.
+  #
+  # Usually, you should either not define instant_prompt_* or simply call prompt_* from it. If
+  # instant_prompt_* is not defined for a segment, the segment won't be shown in instant prompt.
+  function instant_prompt_example() {
+    # Since prompt_example always makes the same `p10k segment` calls, we can call it from
+    # instant_prompt_example. This will give us the same `example` prompt segment in the instant
+    # and regular prompts.
+    prompt_example
+  }
+
+  # User-defined prompt segments can be customized the same way as built-in segments.
+  typeset -g POWERLEVEL9K_EXAMPLE_FOREGROUND=3
+  typeset -g POWERLEVEL9K_EXAMPLE_BACKGROUND=1
+  # typeset -g POWERLEVEL9K_EXAMPLE_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  # Transient prompt works similarly to the builtin transient_rprompt option. It trims down prompt
+  # when accepting a command line. Supported values:
+  #
+  #   - off:      Don't change prompt when accepting a command line.
+  #   - always:   Trim down prompt when accepting a command line.
+  #   - same-dir: Trim down prompt when accepting a command line unless this is the first command
+  #               typed after changing current working directory.
+  typeset -g POWERLEVEL9K_TRANSIENT_PROMPT=always
+
+  # Instant prompt mode.
+  #
+  #   - off:     Disable instant prompt. Choose this if you've tried instant prompt and found
+  #              it incompatible with your zsh configuration files.
+  #   - quiet:   Enable instant prompt and don't print warnings when detecting console output
+  #              during zsh initialization. Choose this if you've read and understood
+  #              https://github.com/romkatv/powerlevel10k#instant-prompt.
+  #   - verbose: Enable instant prompt and print a warning when detecting console output during
+  #              zsh initialization. Choose this if you've never tried instant prompt, haven't
+  #              seen the warning, or if you are unsure what this all means.
+  typeset -g POWERLEVEL9K_INSTANT_PROMPT=verbose
+
+  # Hot reload allows you to change POWERLEVEL9K options after Powerlevel10k has been initialized.
+  # For example, you can type POWERLEVEL9K_BACKGROUND=red and see your prompt turn red. Hot reload
+  # can slow down prompt by 1-2 milliseconds, so it's better to keep it turned off unless you
+  # really need it.
+  typeset -g POWERLEVEL9K_DISABLE_HOT_RELOAD=true
+
+  # If p10k is already loaded, reload configuration.
+  # This works even with POWERLEVEL9K_DISABLE_HOT_RELOAD=true.
+  (( ! $+functions[p10k] )) || p10k reload
+}
+
+# Tell `p10k configure` which file it should overwrite.
+typeset -g POWERLEVEL9K_CONFIG_FILE=${${(%):-%x}:a}
+
+(( ${#p10k_config_opts} )) && setopt ${p10k_config_opts[@]}
+'builtin' 'unset' 'p10k_config_opts'
diff --git a/zsh/.zshrc b/zsh/.zshrc
index d564d9c..d43756c 100644
--- a/zsh/.zshrc
+++ b/zsh/.zshrc
@@ -1,3 +1,10 @@
+# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
+# Initialization code that may require console input (password prompts, [y/n]
+# confirmations, etc.) must go above this block; everything else may go below.
+if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
+  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
+fi
+
 ZINIT_HOME="${XDG_DATA_HOME:-${HOME}/.local/share}/zinit/zinit.git"
 
 if [ ! -d "$ZINIT_HOME" ]; then
@@ -6,3 +13,62 @@ if [ ! -d "$ZINIT_HOME" ]; then
 fi
 
 source "${ZINIT_HOME}/zinit.zsh"
+
+zinit ice depth=1; zinit light romkatv/powerlevel10k
+
+zinit light zsh-users/zsh-syntax-highlighting
+zinit light zsh-users/zsh-completions
+zinit light zsh-users/zsh-autosuggestions
+zinit light Aloxaf/fzf-tab
+
+zinit snippet OMZP::git
+zinit snippet OMZP::sudo
+zinit snippet OMZP::archlinux
+
+autoload -Uz compinit && compinit
+
+zinit cdreplay -q
+
+# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
+[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
+
+# Keybindings
+bindkey -e
+bindkey '^p' history-search-backward
+bindkey '^n' history-search-forward
+bindkey '^[w' kill-region
+
+# History
+HISTSIZE=5000
+HISTFILE=~/.zsh_history
+SAVEHIST=$HISTSIZE
+HISTDUP=erase
+setopt appendhistory
+setopt sharehistory
+setopt hist_ignore_space
+setopt hist_ignore_all_dups
+setopt hist_save_no_dups
+setopt hist_ignore_dups
+setopt hist_find_no_dups
+
+# Completion styling
+zstyle ':completion:*' matcher-list 'm:{a-z}={A-Za-z}'
+zstyle ':completion:*' list-colors "${(s.:.)LS_COLORS}"
+zstyle ':completion:*' menu no
+zstyle ':fzf-tab:complete:cd:*' fzf-preview 'ls --color $realpath'
+zstyle ':fzf-tab:complete:__zoxide_z:*' fzf-preview 'ls --color $realpath'
+
+# Aliases
+alias ls="eza"
+alias ll="eza -alh"
+alias tree="eza --tree"
+alias zz="cd -"
+alias dcupd="docker compose up -d --remove-orphans"
+alias dcdown="docker compose down"
+alias dclogs="docker logs -f --tail 100"
+alias vi="nvim"
+alias vim="nvim"
+
+# Shell integrations
+eval "$(fzf --zsh)"
+eval "$(zoxide init --cmd cd zsh)"